Synology Router RT6600ax
1 / 17Pages

Hardware Installation Guide

Chapter 1: Before You Start Chapter 2: Hardware Setup Set up Synology Router Manager (SRM) 11

Before You Start Thank you for purchasing this Synology product! Before setting up your new expansion unit, please check the package contents to verify that you have received the items below. Also, make sure to read the safety instructions carefully to avoid harming yourself or damaging your expansion unit. Note: All images below are for illustrative purposes only, and may differ from the actual product. Package Contents Main unit x 1

Note: Model specifications are subject to change without notice. Please refer to www.synology.com for the latest information

Hardware Setup Adjust Antennas For optimal Wi-Fi performance, tilt the antennas so that they are at a 90 degree angle to the surface. Position Your RT6600ax For optimal performance, it is recommended to position your RT6600ax as advised below: • On a stable surface (e.g. an elevated shelf) away from any possible physical interruptions. • Close to the center of the area where the wired/wireless client devices are placed, and within a visible distance from the wireless devices. • In a position where few walls and ceilings are between your RT6600ax and its client devices. • Away from any...

Use the included network cable to connect your RT6600ax (at the WAN1 port) to the ISP modem. Connect one end of the power adapter to the power port on your RT6600ax, and the other end to the power outlet. Press the power button to power on your RT6600ax. Wait for up to two minutes until the STATUS and WAN LED indicators turn green. From laptop ► Google Play « AppStore Connect wireless client devices to your RT6600ax. When the Wi-Fi indicator has turned static green, RT6600ax is ready to connect with other devices. Use your wireless device to scan and join the Wi-Fi network created by your...

3 Connect wired client devices to your RT6600ax. Use network cables to connect devices to the LAN ports. The corresponding LAN LED indicators should turn orange/green to indicate successful connection. From desktop computer Connect computer to the router Follow the setup wizard Mount Your RT6600ax • Do not install the device in an unstable location, such as on an unsteady table or an inclined surface. • Do not place another hub or object that generates heat on top of this unit. • Please route all cables properly to prevent people from tripping over them. • Ensure the air vents on the...

Set up Synology Router Manager (SRM) 1 Use a computer or wireless device connected to your RT6600ax's local network. If you use a wireless device, scan and join the Wi-Fi network (SSID: Synology_(Serial); Password: synology). 2 Open a web browser, and enter either URL into the address bar: • http://router.synology.com • http://192.168.1.1:8000 3 Once connected, click Start to launch the SRM Setup Wizard. 4 Fill in the information to set up the administrator account. Click Next to continue. 5 Fill in the information to set up the Wi-Fi network. Click Next to continue. 11 Chapter 2: Hardware...

6 Set up the operation mode. When choosing the Wireless Router mode, you can also enable External access to SRM so that only external access via the HTTP(S) port (e.g. 8000/8001) can reach SRM. 7 Choose an Internet connection type: • PPPoE: Choose this option if you have obtained PPPoE credentials from the ISP. • Manual IP: Choose this option if you have obtained an available IP address for use. • Auto IP: Choose this option if you rely on an ISP modem for automatic IP assignment. 8 The wizard will continue to set up your RT6600ax, and it may take up to three minutes to complete the setup.

9 After the setup is complete, click Start managing now to enjoy SRM and its various features. Note: 1. Above is a general demonstration of the SRM setup steps. The steps and available options may somewhat vary depending on your device type (e.g. PC or wireless device), access type (LAN, WAN, or Wireless LAN), and chosen operation mode (Wireless Router or Wireless AP). 2. If the setup is to be completed with a wireless device, remember to download DS router to manage your RT6600ax from anywhere. 13 Chapter 2: Hardware Setup

Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This...

Industry Canada statement: This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y...

immimmwz.im^mBwmm^RTimimm-.mmmTmm.m.m, js&toe,m&# r^S^I^^^ffiM(MPE)^¥MlmW/cm2 ,£UjlESIIffi& 0.358 mW/cm2 ,gf#l21 cmj ■ 802.11 ax&.«& s * ( 325$.) :RT6600ax Equipment name Type designation (Type)

RED Compliance Statement Compliance with 2014/53/EU Radio Equipment Directive (RED) In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table provides information on the frequency bands used and the maximum RF transmit power of the product for sale in the EU: This device is restricted to indoor use