CoroCAM 7
2Pages

{{requestButtons}}

Catalog excerpts

CoroCAM 7 - 1

PROFESSIONAL SOLAR BLIND CORONA CAMERA The CoroCAM 7® is a professional grade solar blind, easy to operate UVc imaging system used to visualize & locate electrical discharges (corona and arcing) from HV hardware. The CoroCAM 7® features the same CoroCAM® solar blind UVc imaging system as used in the CoroCAM 6d®, but pairs it with a high performance visible camera and a viewfinder. The CoroCAM 7® is typically used to inspect HV infrastructure operating at 3.3 Kv and above for corona discharges and arcing. A high resolution focusable ventilated viewfinder (800 x 600 pixels) and a large, robust mounted, variable angle, colour LED backlit LCD display (640 x 480 pixels), both optimised for use in full daylight to make inspection comfortable A high sensitivity detector, which can detect UVc emissions down to 2.05 x 10-18 W/cm2, this allows for the detection of the smallest corona discharges UV count compensation for distance Motorised solar blind filter removal in Non Solar Blind Mode to increase sensitivity for use at night or indoors Users can select optimised presets for detection or location of discharges Corona signals above the threshold level are displayed in realtime A high zoom colour visible camera with a resolution of 768 x 576 pixels Syncronised UV & Visible Zoom from 1x system zoom (defined as 8°x6° / 10° Diagonal) to 4x system zoom (optical for the Visible channel and digital for the UV channel) <1.5 m minimum focus distance - no accessory optics required Onboard still image and video recording in high quality formats Integrated GPS with internal and booster antenna Integrated high power flashlight Easily replaceable Li-ion batteries deliver up to 3 hours operating time Additional batteries are readily available and lightweight Fast boot avoids the need for power saving modes User profile setup, save and restore Easy operation of the camera with one hand via a multifunction keypad, hot keys to specific functions Ethernet port for remote control The On-Screen Display (OSD) shows all the relevant information Camera software update via download to SD card A 18 month warranty, extendable to 36 months Notable Features: Viewfinder | LCD display | Fast boot | User profiles | High sensitivity UV camera | UV count compensation | NightView mode Premium spec visible camera | High visible zoom | High resolution video recording | Translucent UV overlay | GPS booster antenna port Onboard microphone a

Open the catalog to page 1
CoroCAM 7 - 2

SYSTEM SPECIFICATIONS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Visible Camera Zoom: 28x optical, 12x digital | UV Camera Zoom: 4x @ 0.5x Zoom: 16° | @ 1x Zoom: 8° | @ 2x Zoom: 4° | @ 4x Zoom: 2° | UV Channel Zoom: Digital to match visible FOV | FOV with UV Overlay: All | Focus: Automatic or manual on visible channel, UV slaved to visible or independent manually | Minimum Focus Distance: UV 0.7 m, VIS 1.5 m SENSITIVITY (TYPICAL) Ultraviolet: 2.05-18 x 10 Watt/cm2 | 3 pC @ 20 m (~ 0.75 pC @ 10 m) (Korea Electrotechnology Research Institute IEC 60270:2000) | 13.16 dBμV(RIV) @ 1 MHZ @ 10...

Open the catalog to page 2

All SYNERGYS TECHNOLOGIES catalogs and technical brochures

  1. VSHOOTER®+

    4 Pages

  2. TS1000

    4 Pages

  3. CoroCAM 6D

    2 Pages

  4. CoroCAM 8

    2 Pages