CoroCAM 6D
2Pages

ECONOMICAL DAYLIGHT CORONA IMAGING CAMERA The CoroCAM 6D® is a re-development of the CoroCAM Solar Blind UVc® imaging System with an emphasis on cost reduction through innovative design. Sensitivity was improved through the use of newly designed solar blind filter packs and a specially developed low noise, high sensitivity detector. Modernized electronics were added to reduce weight, system noise and size. The CoroCAM 6D® can be factory fitted with an optional motorized module which allows the camera to operate in Solar Blind (SB) or Non-Solar Blind (NSB) modes. NSB mode removes the SB filter from the light path and allows more UV light to reach the detector - this boosts the cameras sensitivity. In NSB mode the CoroCAM 6D® can only be used at night or indoors. A high sensitivity detector, which can detect UVC emissions down to 2.05x10-18 W/cm2, this allows for the detection of the smallest corona discharges UV Gain, threshold or integration can be set to optimize the resulting image Factory fitted optional Motorized Solar blind filter position module can remove the solar blind filter from the light path to enhance sensitivity Corona signals above the threshold level are displayed in realtime The UV count sampling box has 3 sizes The UV count is adjusted to compensate for camera settings A high sensitivity colour video camera with a resolution of 768 x 576 pixels which can operate at light levels down to 0.0004 lux, rendering it capable of seeing corona streamers under near dark conditions. Syncronised UV & Visible Zoom from 1x system zoom (defined as 8°x6° / 10° Diagonal) to 2x system zoom (optical for the Visible Channel and digital for the UV channel) Automatic or Manual visible camera focus control. UV camera focus can be set manually or slaved to the visible camera focus position <0.7m minimum focus distance - no accessory optics required The visible image can be enhanced for backlight compensation or set to low light mode A large, robust mounted, variable angle, colour LED backlit LCD display with 640x480 pixels resolution optimised for use in full daylight makes for easy inspection. Screen brightness can be manually or automatically set The On Screen Display (OSD) shows all the relevant information UV is overlaid onto the visible in one of 4 preset or 100 user selected colors The UV overlay translucency can be adjusted to show the discharge source Integrated GPS with internal and booster antenna Onboard still image and video recording in high quality formats Easily replaceable lightweight Li-ion batteries, available from most camera stores, deliver up to 3 hours operating time Fast set up & boot up avoids the need for power saving modes Easy operation of the camera with one hand via a multifunction keypad, with hot keys to specific functions. Camera software update via download to SD card A 18 month warranty, extendable to 36 months Unique Features: Fast set up & boot up | High resolution video recording | Translucent UV overlay | GPS boos

SYSTEM SPECIFICATIONS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE ULTRAVIOLET CHANNEL Image type: Monochrome video | Detector Life Span: No degradation | Sensitivity: 2.05x10¯18 Watt/cm Typical (SB Mode), ~ 1 x 10¯18 Watt/cm2 (NSB Mode) | pC: 3 pC@ 20 m (~ 0.75 pC @ 10 m) (Korea Electrotechnology Research Institute - IEC 60270:2000) | RIV: 13.16 dBμV (RIV) @ 1 MHZ @ 10m (Korea Electrotechnology Research Institute NEMA107 - 1987) | Spectrum: UV 240 – 280 nm | Field of View: 8° Horizontal x 6° Vertical ~ 10° Diagonal = 1x system zoom | Zoom Range (optical): 1x System Zoom (SZ) | Zoom...