FOOTWEAR MOULD CLEANING MACHINE Synco provides surface preparation machines for various applications. Synco supplies standard machines as well as special purpose machines as per special applications. Generally the Shoe manufacturers come across the problems of residuals left on the mould of shoes. Removal of these residuals, many a times, is not an easy task by many of the methods being used. Generally acids / chemicals are used to remove rubber residual on moulds. This process have various drawbacks i.e. residual acids or chemicals damage mould surface and results in reduced footwear quality, cost of acid is high, poisonous acid fumes cause serious health problems, disposal of acids is difficult etc. Synco has come up with solution for cleaning of moulds by glass bead blasting process that furnishes an easy process of cleaning of residual rubber from moulds keeping mould surface unaffected. We can visualize the effectiveness of this process from photograph of the mould before and after blast cleaning. For More Details Contact Us At SYNCO INDUSTRIES LIMITED 16-A (III), Heavy Industrial Area, Jodhpur - 342 005 Cell: +91 - 9214407021 Tel: +91 - 291 - 2741571/671 Fax: +91 - 291 - 2742557 Email: [email protected] Web: www.synco.co.in