RADAR NEXT LEVEL ClI® ik>U LPR®-1D24 with 4 relay contacts LPR®-1D24 with Anticollision Manager STU for I/O-Signal Handling (digital up/down trigger) measured values security zone Col lision Control Center warning zone stopp zone Collision Avoidance for Cranes at Different Heights- The Collision Control Center (CCC) from Symeo is a modular assistance and management system developed especially for preventing collisions between cranes and objects within the cranes' operation zones. The software makes it easy to configure triggers for warning and stop signals. The system is capable of tracking up to 15 cranes with different dimensions and heights. Permanent or selectable safety zones can be configured in the system for specific projects. For example, overruns in these zones can be reported or completely blocked All crane movements are monitored in real time. By using the STU (Symeo Telemetry Unit), the crane hook height and 3 different loads can be taken into account to avoid collisions. The positions and speeds of the cranes and trolleys are measured with the highly reliable LPR®-1D24 wireless system. The individual distance measurement values are displayed in the software interface. This data is transmitted via the integrated LPR® wireless data link or via Ethernet. Symeo's Collision Control Center visualizes and monitors the position, the measurement data and the relay states of all participating objects in real time. It calculates collision warning signals dynamically depending on the crane parameters (speed, acceleration, reaction time, etc.) and sends them to the LPR®-1D24 of the affected crane in order to open the corresponding relay contacts (potential-free). The Symeo collision warning system does not require or interfere with a WiFi connection. • Reliable collision avoidance for cranes at different heights • Flexible configuration for typical crane applications • No central control unit (PLC) required • Crane-to-crane communication via integrated LPR® radio data connection or via Ethernet • Easy access to the CCC via web-based user interface

• Operation, parameterization and monitoring is done via a web browser. • Individual cranes which have no power due to maintenance can be temporarily put into maintenance mode in the Collision Control Center in order to maintain the system’s overall functionality. SYMEO GmbH | Prof.-Messerschmitt-Strafte 3 a | 85579 Neubiberg/Munich | Germany P: +49 89 6607796-222 | E-Mail: [email protected] | www.symeo.com