Catalog excerpts
Lighting the world around you Architectural Exterior Lighting 2018/19 Supplement
Open the catalog to page 1The Cube family offers a versatile solution for lighting designers and architects. The design is a study in clean lines and minimal form which take the shape of a cube. A number of different versions such as ceiling mounted, as an adjustable fixture head or a wall washer. A wide range of beam spreads and accessories allow comfortable viewing from any angle. Extremely precise beam spread optics offer the opportunity to create light effects with all 3 of the available sizes. Cube/SP 3 SPOTLIGHTS & FLOODLIGHTS
Open the catalog to page 3Cube/SP - Technical specifications The design of the Cube family follows the tendency of the architectural market toward bold, clean lines and angular forms. The Cube family offers a wide range of beam spread optics including tight spot medium, diffused and asymmetric light distribution. IP65 Water jet-proof from any direction. The adjustable bracket provides excellent range in directing the light. Spotlights & Floodlights The asymmetric version offers more precise control of the light; distributed homogeneously in the directed area.
Open the catalog to page 4Cube spotlight • Equipped with Aluminium bracket and angle measurements for precise aiming. • Choice of 2 colour temperatures. • Salt spray tested for over 1500 hours exposure in saline mist environment. • Aluminium colour as standard. • Mac Adam 3 step. Construction: • Body - Corrosion resistant die-cast aluminium • Finish - Polyester powder coated body with anticorrosion treatment • Diffuser - Toughened safety glass • Gasket - Silicon rubber • Cabling - Use (EN 60598-1) H07RN-F cable with diameter between 7 and 10mm only • Power - Integral electronic control gear 220/240V - 50/60Hz LIGHT...
Open the catalog to page 5Cube/SP2 Cube spotlight • Equipped with Aluminium bracket and angle measurements for precise aiming. • Choice of 2 colour temperatures. • Choice of 5 beam distributions. • Salt spray tested for over 1500 hours exposure in saline mist environment. • Aluminium Colour as standard. • Mac Adam 3 step. Construction: • Body - Corrosion resistant die-cast aluminium • Finish - Polyester powder coated body with anti-corrosion treatment • Diffuser - Toughened safety glass • Gasket - Silicon rubber • Cabling -Use (EN 60598-1) H07RN-F cable with diameter between 7 and 10mm only • Power - Integral...
Open the catalog to page 6LIGHT SOURCE INCLUDED Light Source Light Source Cube/SP2 - Road Asymmetric beam 4070347
Open the catalog to page 7Cube/SP3 Cube spotlight • Equipped with Aluminium bracket and angle measurements for precise aiming. • Choice of 2 colour temperatures. • Choice of 4 beam distributions. • Salt spray tested for over 1500 hours exposure in saline mist environment. • Aluminium colour as standard. • Mac Adam 3 step. Construction: • Body - Corrosion resistant die-cast aluminium • Finish - Polyester powder coated body with anti-corro ion treatment s • Diffuser - Toughened safety glass • Gasket - Silicon rubber • Cabling - Use (EN 60598-1) H07RN-F cable with diameter between 7 and 10mm only • Power - Integral...
Open the catalog to page 8Light Source Light Source Cube/SP3 - 9LED - Road Asymmetric beam 4070371 Spotlights & Floo
Open the catalog to page 9Cube/SP3 Cube spotlight • Equipped with Aluminium bracket and angle measurements for precise aiming. • Choice of 2 colour temperatures. • Choice of 4 beam distributions. • Salt spray tested for over 1500 hours exposure in saline mist environment. • Aluminium RAL 9006 as standard. Construction: • Body - Corrosion resistant die-cast aluminium • Finish - Polyester powder coated body with anti-corrosion treatment • Diffuser - Toughened safety glass • Gasket - Silicon rubber • Cabling - Use (EN 60598-1) H07RN-F cable with diameter between 7 and 10mm only • Power - Integral electronic control...
Open the catalog to page 10LIGHT SOURCE INCLUDED Light Source Light Source Cube/SP3 - 21LED - Road Asymmetric beam 4070359 Spotlights & Floo
Open the catalog to page 11The Cube family offers versatile solutions for lighting designers and architects. The design is a study in clean lines and minimal form which takes the shape of a cube. Following the same design language there are a number of sizes and versions within the Cube family; wall mounted, ceiling mounted, as an adjustable fixture head or wall washer. Now upgraded using Chip On Board (COB) LED technology and dedicated new reflectors, Cube family (C1/C2/C3/SP1/SP2/SP3) are more efficient and can reach highter lumen outputs. SURFACE WALL & CEILING
Open the catalog to page 13Cube/C1 Cube downlight • Choice of 2 colour temperatures. • Choice of 2 beam distributions. • Salt spray tested for over 1500 hours exposure in saline mist environment. • Aluminium colour as standard. • Mac Adam 3 step Construction: • CRI : 80 • Body - Corrosion resistant die-cast aluminium Cube/C1 • Finish - Polyester powder coated body with anti-corro ion treatment s • Diffuser - Tempered safety glass - 10 mm thickness, mechanical and thermal shock resistant • Gasket - Silicon rubber • Cabling -Use (EN 60598-1) H07RN-F cable with diameter between 7 and 10mm only • Power - Integral...
Open the catalog to page 14Cube/C2 Cube downlight • Choice of 2 colour temperatures. • Choice of 3 beam distributions. • Salt spray tested for over 1500 hours exposure in saline mist environment. • Aluminium colour as standard. • Mac Adam 3 steps Construction: • CRI: 80 • Body - Corrosion resistant die-cast aluminium • Finish - Polyester powder coated body with anti-corro ion treatment s CUBE/C2 Medium beam CUBE/C2 Narrow beam • Diffuser - Tempered safety glass - 10 mm thickness, mechanical and thermal shock resistant • Gasket - Silicon rubber • Cabling -Use (EN 60598-1) H07RN-F cable with diameter between 7 and 10mm...
Open the catalog to page 15Cube/C3 Cube downlight • Choice of 2 colour temperatures. • Choice of 3 beam distributions. • Salt spray tested for over 1500 hours exposure in saline mist environment. • Aluminium colour as standard. • Mac Adam 3 steps Construction: • CRI : 80 • Body - Corrosion resistant die-cast aluminium • Finish - Polyester powder coated body with anti-corro ion treatment s Cube/C3 - Medium beam Cube/C3 - Narrow beam • Diffuser - Tempered safety glass - 10 mm thickness, mechanical and thermal shock resistant • Gasket - Silicon rubber • Cabling -Use (EN 60598-1) H07RN-F cable with diameter between 7 and...
Open the catalog to page 16All Sylvania catalogs and technical brochures
-
Equinox
4 Pages
-
Gro-Lux LED Linear
8 Pages
-
PAR56 LED - 0060540
3 Pages
-
Swimming Pool PAR56 LED
4 Pages
-
SylSmart Connected Gateways
1 Pages
-
Kalani
4 Pages
-
START Bollard IP65
2 Pages
-
Isoline
4 Pages
-
LYTEPANEL II
4 Pages
-
LED Pipe
4 Pages
-
Domino
12 Pages
-
Myriad V
52 Pages
-
SylDuo
2 Pages
-
9014925
2 Pages
-
0068100
5 Pages
-
Flexible LED system
16 Pages
-
BEACON
6 Pages
-
ARMATURENCATALOGUS 2022
720 Pages