Technical Specifications:
The document describes advanced digital indicators with a range of features including a large display with integrated LEDs for tolerances, programmable settings, and a reinforced clamping shaft. The indicators are robustly constructed, water and coolant resistant, and feature new technology with configurable menus. They offer a broad choice of functions such as MIN/MAX/DELTA, TOL, Factor, PRESET, and AUTO OFF. The maximum error is 3 µm, and they include an automatic wake-up and sleeping mode with an Absolute System S.I.S.

Design and Construction:
The indicators have a hardened steel clamping Ø 8-h6, an aluminum case, and a rotating display over 270°. They are equipped with an interchangeable contact point M2.5 made of stainless steel with a TC ball. External power supply and data transfer are facilitated using one cable only.

Measurement and Functionality:
The measuring range varies from 12.5 mm to 150 mm with resolutions of 0.01 mm and 0.001 mm. The repeatability is specified, and the IP rating is IP54. The indicators can be programmed by PC and include standard functions such as mm/inch conversion, preset, min/max/delta, tolerances, resolution, direction of measurement, multiplication factor, and automatic or manual switch off.

Additional Features:
The document mentions the inclusion of a lithium battery CR2032, an instruction manual, and a calibration certificate for instruments with 0.001 mm resolution. The measuring force is specified with standard, low, and high options available on request.