Product Overview: The document provides technical specifications for the MD512-500
connectors, which are designed with a pitch of 5.00mm and available in configurations ranging from 2 to 8 poles.
Materials and Construction: The housing is made from PA 66, while the cage clamp is constructed from brass and tin-plated. The contact material is phosphor bronze, also tin-plated, and the screw thread is made of zinc-plated steel.
Wire Specifications: The connectors accommodate wire sizes from 12 to 22 AWG, with a recommended wire strip length of 6mm to 7mm. The maximum tightening torque is specified at 3.5 Lb-in.
Technical Data: The connectors comply with EN-VDE standards, supporting a nominal current of 12A and a nominal cross-section of 2.5mm². The maximum load current is 12A. The insulating material is PA, rated UL94 V0, and the connectors are UL/CUL certified for a nominal voltage of 300V and a nominal current of 12A.
Dimensions: The document includes specific measurements for the connectors, such as 5.00xP and 5.00x(P-1), with additional dimensions provided in both millimeters and inches.
See more