video corpo

I.SITE IIId

I.SITE IIId

I.SITE IIId

Product catalog summary
Overview: The I.SITE IIId is a POCSAG-transmitter designed for local alarm systems, featuring optional backup battery support, digital inputs, and analog voice call capabilities. It operates via Ethernet LAN and can send alerts during power failures.
Specifications:
  • Transmission: VHF or UHF with power ranging from 1-25 W.
  • Interface: Ethernet LAN (RJ-45) with optional RS485.
  • Digital Inputs: Three optional local digital inputs for triggering messages.
  • Backup Battery: Ensures operation during power outages.
  • Analog Voice: Available as an option, including a Voice Cluster fallback.
Key Features:
  • Remote input contacts and networking via LAN.
  • Uninterruptible operation mode with backup battery.
  • Parallel operation in asynchronous networks.
  • ESPA 4.4.4 input protocol as an option.
  • Fast alerting buttons with the PLUS option.
Technical Data:
  • Dimensions: 400 mm × 210 mm × 120 mm.
  • Weight: 7.5 kg (without battery).
  • Operating Temperature: -20 °C to 55 °C.
  • Input Voltage: 90-264 VAC.
  • Protection Class: IP65.
  • Power Consumption: 5 W (standby), 75 W (max transmission).
Standards and Compliance:
  • Safety: EN 62368-1.
  • EMC: ETSI EN 301489-1, ETSI EN 301489-2.
  • Radio: ETSI EN 300113.
Options and Compatibility:
  • Battery: Compatible with all options.
  • Digital Contacts: Compatible with all options except PLUS.
  • RS485 Interface: Compatible with Battery and Digital Contacts.
  • Analog Voice and Cluster: Compatible with Battery, Digital Contacts, and PLUS.
Contact Information: Swissphone Wireless AG, Fälmisstrasse 21, CH - 8833 Samstagern, Tel +41 44 786 77 70, Email: [email protected], Website: swissphone.com
See more

Catalog excerpts

I.SITE IIId-1

The transmitter for local alarm systems i.SITE iiid is a POCSAG-transmitter for local alarm systems. it has an optional backup battery including charging function and digital inputs. The backup battery ensures the possibility to send out alerts in the event of a power failure. Analog voice calls are also available as an option. it is controlled via Ethernet LAN (RJ-45). POCSAG-messages are prepared internally and sent via the VHF or UHF transmission unit (1-25 W). Three local digital inputs are available as option, a service contact is always present. These are either processed directly as POCSAG-messages and/or reported as additional status messages of the alarm server (i.SEARCH). Multiple I.SITE iiid operate via LAN in an asynchronous mode but can operate synchronous if the radio coverage do not overlap. POCSAG-messages are therefore usually sent asynchronously. For synchronous transmission concepts the I.SITE lid should be used. The Swissphone protocol for integrating the I.SITE Iiid into your solution is available to third-party suppliers. An RS485 interface can be optionally ordered as alternative to the LAN interface. With the Voice Cluster Option, it is possible to have an I.SITE iiid with Voice operate as fallback of another I.SITE iiid with Voice. With the Plus option, three buttons are added, these buttons can be configured to automatically send out customs alerts. • Remote input contacts • Networking thanks to LAN port • Uninterruptible operation mode • Parallel operation of multiple I.SITE iiid transmitter via LAN for asynchronous networks (as long as coverage areas do not overlap). • ESPA 4.4.4 input protocol as option • Analog Voice and Analog Voice Cluster • Buttons for fast alerting with the PLUS option

 Open the catalog to page 1
I.SITE IIId-2

Performance features Standards gemass den folgenden EU Richtlinien: General Interface Dimension (w x h x d) Operating temperature range Protection class input contacts (optional) Service contact Transmission Unit Frequency bands Antenna connection Transmission power Channel spacing POCSAG transmission rate Duty cycle Technical data Safety EN 62368-1 400 mm x 210 mm x 120 mm 7.5 kg (without optional battery) PC software or through third-party providers Three contact inputs (E1, E2, E3 (open/close) for triggering messages (edge triggered, potential-free 3 - 30 V, debounced to 100 ms) One door contact...

 Open the catalog to page 2

All Swissphone Wireless AG catalogs and technical brochures

  1. HURRICANE DUO

    2  Pages

  2. s.QUAD ATEX

    2  Pages

  3. s.QUAD Voice

    2  Pages

  4. s.QUAD X15

    2  Pages

  5. s.QUAD X35

    2  Pages

  6. s.QUAD C55

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.