SBP Butterfly Valves plastomer-lined DN25 – DN1000 resp. 1" – 42" SBP Butterfly Valves are ideally suited for Shut-off, Flow Control and Throttling of corrosive and abrasive process media in either liquid, powdery or gaseous state. Modular Design Valves are available as wafer- or lug-style versions, with bare shaft as per standard. Valves can be delivered as complete units, i.e. with mounted-on locking handles, manual gearboxes or with quarter turn pneumatic actuators double- or single-acting. The sturdy design bodies are made of cast steel 1.0619 (WCB), coating RAL 5005 signal-blue or stainless steel casting 1.4408 (CF-8M), with resistant liners such as PTFE, PTFE-AS (anti-static), PTFE-T (mod.) or UHMWPE. Main Features • Heavy-duty, compact construction, maintenance-free • Bubble-tight shut-off throughout the full pressure and temperature range • Wide selection of high-quality liner and disc materials for economical valve performance • Unique shaft sealing arrangement assures maintenancefree operation at automated processes and high operating pressures, optimized and reinforced liner shape • No need of additional flange gaskets due to wide and chambered flange sealing surface • One-piece disc/shaft for hysteresis-free flow control, with polished sealing surface leading to low torque values • Flange connections according to DIN PN10/16 resp. ANSI 150lbs, for installation into existing piping systems Conformity according to European Pressure Equipment Directive 2014/68/EU (PED) PTFE/PFA, locking handle PTFE-AS/PFA-AS, bare shaft Wafer SS316L (1.4435) PTFE/PFA, pneum. actuator Subject to change w/o notice PTFE/PFA, pneum. actuator and E/P position

SBP Butterfly Valves plastomer-lined Operating Conditions • Temperature range from –40°C (-40°F) up to +230°C (+446°F), depending on lining material • Pressure range from 1mbar (0.01 psi) up to 16 bar (232 psi), depending on size/pressure/temperature Testing / Marking • Pressure- and tightness testing acc. to EN 12266-1, leakage rate A, resp. API 598. • Marking of valves on body and name plate acc. to EN 19. • Material- resp. test certificates acc. to EN 10204-3.1/2.2/2.1 Outline Drawing / Actuator Options T1 Face to face B acc. to DIN EN 558-1 range 20 1) Wafer made of Lug bodies with drilled-through...

SBP Butterfly Valves plastomer-lined Construction of Valve Mounting top flange acc. to EN ISO 5211, incl. O-ring Name plate 1.4301 (SS304) Marking acc. to EN 19 Double-D shaft acc. to EN 12116 Rated breaking point Body made of cast steel 1.0619 (WCB), powder-coated RAL 5005 signal-blue or SS casting 1.4408 (CF-8M) Flange Standard acc. to EN 1092 or ASME B16.5 One-piece disc/shaft, solid or encapsulated min. 3 mm Triple shaft bearing Belleville springs Pressure ring Elastomer insert Body bolts made of 1.4301, A2-70 (SS304) Liners made of PTFE, PTFE-T or PTFE-AS (antistatic), thickness min. 3 mm,...

SBP Butterfly Valves plastomer-lined PTFE PVDF Low temperature or austenitic steels are required for use below -10°C (14°F) operating temperature. Torque Values Torque values for PFA-encapsulated or solid discs and specified body liner DN Size nom. A80 PTFE A81 PTFE-T A82 PTFE-AS A89 PP A90 UHMWPE max. allowable • For liner resp. disc encapsulation never use for both the same material, otherwise considerable increase of torque values must be expected! • Stated values to be break-away torques without any consideration of safety factors for actuators. Figures stated for execution PTFE/PFA/bare...

SBP Butterfly Valves plastomer-lined Flow Rate Values Kv Estimated values at corresponding opening angle of valve disc DN Size Flow Characteristic Opening angle of valve disc DN 80 (3") 60° Streamline Flow Contour for Maximum Capacity ! Valve Coefficient Flow Rate Flow Rate Specific Gravity Specific Gravity Downstream Pressure Pressure Drop Temperature usg/min (m3/h) usg/min (m3/h) usg/min (Nm3/h) lbs/usg (kg/dm3) lbs/usg (kg/Nm3) psi (bar) psi (bar) °K (°C) Typical Service Applications • Chemical CPI • Petro-Chemical • Pharmaceutical Industry • Semi-Conductors • Pulp and Paper • Food Processing...

SBP Butterfly Valves plastomer-lined PTFE PTFE-T Low temperature or austenitic steels are required for use below -10°C (14°F) operating temperature. Face to face B acc. to DIN EN 558-1 Range 20 B: DN350/14": optional 78 mm , Range 25, ASME B16.10 wide 1) G: DN350/400 with DD drive, DN450-600 with 1x Keyway

SBP Butterfly Valves plastomer-lined Torque Values Torque values for PFA-encapsulated disc and specified body liner DN • For liner resp. disc encapsulation never use for both the same material, otherwise considerable increase of torque values must be expected! • Stated values to be break-away torques without any consideration of safety factors for actuators. Figures stated for execution PTFE/PFA/bare shaft DN Lug-style body Wafer-style body Weights for pneumatic actuators acc. to separate data sheet * Wafer 450/18" made of Lug bodies with drilled-through holes Flow Rate Values Cv Estimated values...

SBP Butterfly Valves plastomer-lined Low temperature or austenitic steels are required for use below -10°C (14°F) operating temperature. F/F acc. to DIN EN 558-1 Range 20 resp. ASME B16.10 Wafer bodies from 30" up to DN1000/42" made of Lug-style bodies with drilled-through flange holes, other versions upon request 1) 2x keyway 90° offset

SBP Butterfly Valves plastomer-lined Torque Values in Nm (in-lbs = Nm x 8.85) Torque values for PFA-encapsulated disc and specified body liner DN • Stated values to be break-away torques without any consideration of safety factors for actuators. Figures stated for execution PTFE/PFA/bare shaft DN Size Lug-style body * Wafer 30", DN800/32", DN900/36" and DN1000/42" made of Lug-style bodies with drilled-through flange holes Weights for pneumatic actuators acc. to separate data sheet Flow Rate Values Cv Subject to change w/o notice