Introduction
SWEP AB35T is part of the AHRI Certified® range of Brazed Plate Heat Exchangers, designed for HVAC systems requiring third-party verified performance. It is suitable for district heating, industrial heat recovery, combined heat & power, and engine oil cooling, offering efficient heat transfer with low pressure drop.

Specifications
The AB35T features different plate configurations (H0/M0, H2/M2, H4/M4) with varying port sizes and maximum volume flows. The port sizes range from 42 mm to 61 mm, and the maximum volume flow is up to 58 m³/h (255.2 gpm). The pressure classes are evaluated per EN 13345, with standard (S) and medium (M) options.

Materials and Construction
The heat exchanger is constructed with stainless steel channel plates and copper brazing. It offers various connection types, including Victaulic, soldering, and flanges. The BPHE concept involves corrugated channel plates with filler material, forming brazed joints for efficient heat transfer.

Certifications and Approvals
SWEP BPHEs are approved by several certification organizations, including the Pressure Equipment Directive (PED) in Europe, Underwriters Laboratories Inc (UL) in America, and Kouatsu-Gas Hoan Kyoukai (KHK) in Japan. Additional approvals are available upon request.

Software and Support
SWEP provides the SSP Software Package for advanced heat transfer calculations, allowing users to select suitable product solutions and generate product drawings. SWEP offers comprehensive service and support for product selection and application advice.

Material Disclaimer
Information provided is in good faith, but SWEP does not guarantee completeness or accuracy. Users must determine product suitability for their specific applications, considering material properties and environmental conditions.