SWEP AB120T - AHRI Certified® SWEP A is our AHRI Certified® range of Brazed Plate Heat Exchangers. If you are looking for the additional security of third-party verified performance for your HVAC systems, this is the choice. The AB120T has been specially developed to operate in demanding heating and industrial applications, typically water-water applications and oil coolers. The product has contributed to the rapid switch to BPHEs from traditional gasket plate heat exchangers and shell-and-tube solutions. It is widely used as a condenser in air conditioning and refrigeration. Externally Victaulic Internally Soldering Flanges Internally threaded threaded threaded DIN/DNC hexagonal exterior *For specific dimensions, or information about other types of connections, please contact your SWEP sales representative. Pressure classes S Standard, evaluated per EN 13345 (25-38 bar/ 363-550 PSI). M Medium, evaluated per EN 13345 (38-48 bar/550-696 PSI). F Intermediate, evaluated per EN 13345 (up to 50 bar/725 PSI). H High, evaluated per EN 13345 (42-56 bar/609-812 PSI). E Higher, developed for CO2 applications, evaluated per EN 13445 (up to 56 bar/812 PSI). AilRS CERTIFIED8 www.ahridirectory.org Liquid to Liquid Brazed & Fusion Bonded Heat Exchangers (LLBF) AHRI Standard 400 www.swep.net SUIEP A DQtfEB COMPANY

SWEP AB120T – AHRI Certified® (PSI)(bar) 50 Third party approvals SWEP BPHEs are generally approved by listed below Pressure E Pressure F certification(PSI) (bar) organizations: 58 Europe, Pressure Equipment Directive (PED) 830 56 America, Underwriters Laboratories Inc (UL) 790 54 Japan, Kouatsu-Gas Hoan Kyoukai (KHK) 750 52 Additionally SWEP holds approvals from a vast variety of 710 50 other certification organizations. For approval information 48 regarding a670 46 c product please contact your local SWEP specifi 630 SWEP reserves the right to make changes representative. 44 without prior notice....