*mydirectindustry

B5

Product catalog summary

Product Overview: The B5 is a compact and versatile heat exchanger designed for applications with small flows, such as small oil or water coolers. It is easy to install and use, making it suitable for environments with extreme demands for compactness.

Basic Specifications: The B5 can accommodate a maximum of 60 plates, with a maximum flow rate of 4 m³/h (17.61 gpm). The channel volume is 0.025 dm³ (0.0009 ft³) per channel. It is constructed from 316 stainless steel plates with nickel brazing, and its weight is calculated as 0.30 kg plus 0.04 kg per plate.

Standard Dimensions: The dimensions are provided in both millimeters and inches, with key measurements including A: 187.50 mm (7.38 in), B: 72.50 mm (2.85 in), and C: 154 mm (6.06 in).

Available Connections: The B5 offers various connection types, including threaded, solder, ultra-high threaded, combo, weld, hose, and O-ring connections. For specific dimensions or other connection types, contact a SWEP sales representative.

Product Concept: The Brazed Plate Heat Exchanger (BPHE) features a plate package with corrugated channel plates and filler material. The vacuum brazing process creates complex channels that allow efficient heat transfer between media at different temperatures, without the need for gaskets or frame parts.

3rd Party Approvals: SWEP products, including the B5, are approved by several certification organizations such as the Pressure Equipment Directive (PED) in Europe, Underwriters Laboratories Inc (UL) in America, and Kouatsu-Gas Hoan Kyoukai (KHK) in Japan.

Product Solution - SSP: SWEP offers the SSP software package for advanced heat transfer calculations, connection selection, and product drawing generation. Additional support and accessories are available from SWEP.

Disclaimer: Information is provided in good faith, but SWEP does not guarantee completeness or accuracy. Purchasers should determine product suitability for their purposes, considering application and material selection. Stainless steel products may still corrode in unsuitable environments. Contact SWEP for more details.

Catalog excerpts

PRODUCT SHEET B5 The B5 enables efficient heat exchange in applications with small flows and extreme demands for compactness. Easy to install and use, the product is small yet versatile, which makes it a good choice for small oil or water coolers. Basic specifications Maximum number of plates (NoP) Channel volume 316 stainless steel plates, nickel brazing Weight excl. connections Standard dimensions # www.swep.net | Product No. 100000919, B5H/1P-SN-S | This PDF was generated 2021.10.13

Open the catalog to page 1

Available connections Threaded Connection Solder Connection Threaded Ultra High Combo Connection Approved Weld Connection Hose Connection O-Ring Connection *For specific dimensions, or information about other types of connections, please contact your SWEP sales representative. Product concept The Brazed Plate Heat Exchanger (BPHE) is constructed as a plate package of corrugated channel plates with a filler material between each plate. During the vacuum brazing process, the filler material forms a brazed joint at every contact point between the plates, creating complex channels. The BPHE allows...

Open the catalog to page 2

B5

B5

Catalog excerpts

All SWEP International catalogs and technical brochures