*mydirectindustry

B120T

Product catalog summary

Product Overview: The B120T is designed for demanding heating and industrial applications, such as water-water applications and oil coolers. It is also used as a condenser in air conditioning and refrigeration, facilitating the transition from traditional gasket plate heat exchangers and shell-and-tube solutions to Brazed Plate Heat Exchangers (BPHEs).

Basic Specifications: The B120T can accommodate a maximum of 250 plates, with a maximum flow rate of 27.4 m³/h (120.64 gpm). The channel volume is 0.241 dm³ (0.0085 ft³) per channel. It is constructed from 316 stainless steel plates with copper brazing, and its weight is calculated as 8.33 kg plus 0.404 kg per plate.

Standard Dimensions: Key dimensions include A: 525 mm (20.67 in), B: 243 mm (9.57 in), C: 456 mm (17.95 in), and D: 174 mm (6.85 in). The dimension F is calculated as 10.00 mm plus 2.29 mm per plate.

Available Connections: The B120T offers various connection types, including solder, threaded, Victaulic, combo, weld, flange, and O-ring connections. For specific dimensions or other connection types, contact a SWEP sales representative.

Product Concept: The BPHE is constructed from corrugated channel plates with a filler material, forming brazed joints at contact points during vacuum brazing. This design allows efficient heat transfer between media at different temperatures, without gaskets and frame parts.

3rd Party Approvals: SWEP products, including the B120T, are approved by certification organizations such as the Pressure Equipment Directive (PED) in Europe, Underwriters Laboratories Inc (UL) in America, and Kouatsu-Gas Hoan Kyoukai (KHK) in Japan.

Software and Support: SWEP offers the SSP (SWEP Software Package) for advanced heat transfer calculations, connection selection, and product drawings. Additional support and accessories are available through SWEP.

Disclaimer: Information is provided in good faith, but SWEP does not guarantee completeness or accuracy. Purchasers should determine product suitability for their purposes, considering application and material selection. Stainless steel products may corrode in unsuitable environments. Contact SWEP for more details.

Catalog excerpts

PRODUCT SHEET B120T The B120T has been specially developed to operate in demanding heating and industrial applications, typically water-water applications and oil coolers. The product has contributed to the rapid switch to BPHEs from traditional gasket plate heat exchangers and shell-and-tube solutions. It is widely used as a condenser in air conditioning and refrigeration. Basic specifications Maximum number of plates (NoP) Channel volume 316 stainless steel plates, copper brazing Weight excl. connections Standard dimensions # www.swep.net | Product No. 100001002, B120TH/1P-SC-M | This PDF was generated 2021.10.13

Open the catalog to page 1

Available connections Solder Connection Threaded Connection Victaulic Connection Combo Connection Weld Connection Flange Connection O-Ring Connection *For specific dimensions, or information about other types of connections, please contact your SWEP sales representative. Product concept The Brazed Plate Heat Exchanger (BPHE) is constructed as a plate package of corrugated channel plates with a filler material between each plate. During the vacuum brazing process, the filler material forms a brazed joint at every contact point between the plates, creating complex channels. The BPHE allows media...

Open the catalog to page 2

B120T

B120T

Catalog excerpts

All SWEP International catalogs and technical brochures