1. Catalogs
  2. SWECO
  3. Hydrocyclones
video corpo

Hydrocyclones

Hydrocyclones

Hydrocyclones

Product catalog summary
Overview: SWECO Hydrocyclone Systems offer an economical and efficient method for removing solid particles ranging from 4 to over 100 microns from various slurries. These systems provide finer separations than screening separators and operate at higher capacities, often replacing decanting centrifuges at a lower cost.
Configurations: Hydrocyclones are available in open-manifold or packed-vessel configurations. Manifolds use cyclones with diameters of 2, 4, 5, or 10 inches, while packed vessels use 1 or 2-inch cyclones. They can handle feed rates from 10 to 3,000 gallons per minute, depending on the system's size and number of hydrocyclones.
Cost Efficiency: The use of SWECO Hydrocyclones can reduce capital, operating, and maintenance costs. The system is shipped assembled, requiring only a consistent feed at steady pressure for reliable operation. Energy costs are lower compared to large centrifuges, and maintenance is simpler.
Integration: For demanding applications, SWECO can integrate hydrocyclone systems with centrifuges or separators, concentrating solids and reducing the volume handled by other equipment, thus allowing for smaller and more cost-effective selections.
Specifications: The packed vessel systems are available with 1 or 2-inch cyclones, with capacities ranging from 12 to 3,000 gallons per minute and cutpoints from 4 to 48 microns. Manifold systems offer similar specifications with varying capacities and cutpoints.
Principle of Operation: Hydrocyclones achieve solid/liquid separation through a pressure drop across the unit. The slurry is forced into the inlet section, creating a high-velocity spin that separates solids from liquids. Solids are ejected from the cyclone's apex, while liquids exit via an axial port. Solids can be collected in an accumulator for settling and periodic purging.
See more

Catalog excerpts

Hydrocyclones-1

HYDROCYCLONE SYSTEMS DRAMATICALLY LOWER YOUR OPERATING & DISPOSAL COSTS W WECO® Hydrocyclone Systems provide an economical and effective method for removing solid particles in the 4 to 100+ micron range from various slurries. Hydrocyclones typically make finer separations than are practical with screening separators and at significantly higher capacities. In many applications cyclones can be used in place of decanting centrifuges, providing the desired result at lower cost. Hydrocyclones are supplied in either an open-manifold or a Packed-Vessel configuration. Manifolds (radial or linear orientation) utilize 2-, 4-, 5-, or 10-inch diameter cyclones while Packed Vessels contain either 1- or 2-inch diameter cyclones. Both configurations can process feed rates from 10 to 3,000 gallons per minute, depending on the size and number of hydrocyclones installed in the system. The use of SWECO Hydrocyclones can lower the capital, operating, / >2 ,1 and maintenance costs of a solids-separation system. Installation is I straight-forward, as the hydrocyclone system is shipped assembled. \ Reliable operation of the system only requires a consistent feed at a \ steady pressure. The only moving parts are the feed pump and the slurry itself. Energy costs are much lower than those of a large ^*^lB .' - centrifuge and the maintenance, when needed, is much simpler and I For demanding applications, SWECO can provide a hydrocyclone j 'i-sB r^jfi*?* • system integrated with a SWECO Centrifuge, Rectangular Separator, \ - " or Round Separator. The hydrocyclone system will concentrate the \ solids, reducing the volume to be handled by the centrifuge or Wr' \ 1 screener. A smaller centrifuge or screener can then be selected at a I 1 L | considerable reduction in cost. d PACKED VESSEL SYSTEMS ARE AVAILABLE USING EITHER 1- OR 2-INCH CYCLONES SWECO HEADQUARTERS, P.O. Box 1509, 8029 Dixie Highway, Florence, KY 41022-1509: +1 (859) 371.4360 Fax: +1(859)283.8469 SWECO EUROPE S.A., Rue de la Recherche, 8, Pare Industriel Sud-Zone I, B-1400 Nivelles, Belgium: +32-67-893434 Fax: +32.67.214368 SWECO ASIA, 63 HillviewAve. #03-02, Lam Soon Industrial Building, Singapore 669569:+65.6762.1167 Fax: +65.6762.1313 SWEQUIPOS S.A. DE C.V., Fernando MontesdeOca No. 21-1,Col. Ind. San Nicolas, Tlalnepantla 54030, Edo. Mexico: +52 (55) 5321-9800, Fax: (55)5310-3358

 Open the catalog to page 1
Hydrocyclones-2

Other Separation Equipment Packed Vessel Specifications Manifold Specifications ' Capacities may vary dependent upon the application Inlet Feed A hydrocyclone has no moving parts and achieves solid/liquid separation by virtue of a pressure drop across the unit. A slurry is forced under pressure into the inlet section of the liner via a tangential inlet port. This, together with narrow cyclone diameter, causes the fluid to spin at high velocity which creates a high g radial acceleration field. The solid particles, being the denser phase, are forced outwards to the hydrocyclone inner wall. Here,...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.