Scan this code for more product information The Swann-Morton Surgical Blade Remover Boxed in units of 50, our sterile surgical blade removers are designed for use in the Operating Room at the point of procedure, to remove the full range of surgical blade shapes from either a No.3 or No.4 fitment handle. Protecting staff from potential sharps injuries during contaminated blade removal, it is also transparent for the count at the end of the procedure, before disposal in an appropriate sharps container. Product is single use, also available in bulk non-sterile, in units of 100 and 500. Retractable Safety Scalpels The Retractable range in high-visibility red has colour coded sliders to indicate the blade shapes, an audible click when engaging the usage, passing, and locking positions. With ribbed, slip resistant finger grips for a secure hold in a gloved hand. They are available in stainless steel blade shapes No’s 10, 10A, 10R, 11P, 12, 14, 15, 15C, 20, 21, 22, 23, 24, 25A and stitch cutter in sterile packs of 10 or 25. All shapes are also available in non-sterile bulk packs of 500 for use in custom procedure trays and kits. Skin Graft Blade (SG3) In stainless steel, with 5cm long cutting edge. Fits a No.3 fitment handle. Sterilised, individually packed, and boxed in units of 20. Safety Scalpels with Retracting Guard The Safety Scalpel with Retracting Guard incorporates safety-engineered features. With single handed activation for ambidextrous use and audible clicks when engaging the usage, neutral safe passing, and final locking positions. The easy-to-use CE marked handles with a graduated measure (for indication only) are available in stainless steel blade shapes No’s 10, 11, 11P, 12, 15, 20, 21, 22, 23, 24, and stitch cutter in sterile packs of 10. These shapes are also available in non-sterile bulk packs for use in custom procedure trays and kits. The “KLEEN” Blade Management System Available in a range of popular blade sizes that are compatible with our No.3 and No.4 surgical handles. The blade is safely encapsulated in a clear cartridge which allows for safe attachment and removal. The cartridge system can be fully retracted exposing the blades during use and then re-engage after use. Supplied individually sealed in a paper film pack, sterilised, and boxed in units of 50. Also available in bulk non-sterile in units of 500. Disposable Scalpels Retractable Safety Scalpels 12D Safety Scalpels with Retracting Guard 12 Available with all standard stainless steel blade shapes, complete with CE marked handles and graduated measure (for indication only). Individually packed in a thermo-formed tray designed to assist with safe passing protocols, sterilised, and boxed in units of 10. Sabre E/11 Disposable Scalpels Guarded Disposable Scalpels Available with the most popular stainless steel blade shapes and fitted with a protective guard. The sterile scalpels are individually packed, boxed in units of 10. Also available in a bulk non-sterile format for use in custom procedure trays and kits. Guarded Disposable Scalpel ‘Fine’ Blades and Handles The ‘Fine’ range has small, slim, and precise blades in stainless steel for delicate operations. Six special handles, including the SF13 and SF23 with independent screwed top sections to facilitate blade changing. The handles accommodate all blade shapes within the ‘Fine’ range. Fine blades are supplied individually V.P.I. protected in metal foil packets and boxed in units of 25. Handles are supplied individually packed. Standard Surgical Blades and Handles – No.3 Fitment 6 Myringotomy Blade Long angled stainless steel blade with short cutting edges at the tip. Purpose designed for both up and down cutting. Individually packed, sterilised, and boxed in units of 10. This blade fits the ‘FINE’ range of handles. Standard Surgical Blades and Handles – No.4 Fitment Standard surgical blades in carbon steel (sterile or nonsterile) or in stainless steel (sterile) are boxed in units of 100 (sterile blades individually V.P.I. protected in metal foil packets; non-sterile blades individually V.P.I. protected in metal foil packets of 5). Non-sterile blades also available in single peel packs and boxed in units of 100. Sabre E/11 and D/15 blades are produced in carbon steel only, sterile, boxed in 100’s. Surgical Blade No’s 18, 19, 20, 21, 22, 22A, 23, 24, 25,25A, 26, 27, 36 fit No’s 4, 4L and 6B handles. All handles are available in stainless steel, individually packed, and boxed in units of 10. Surgical Blades and Handles by Cygnetic ® Surgical Blades and Handles For use within Orthopaedic and General surgical procedures. Cygnetic ® provides the surgeon with additional strength and stability through the patented combination of its specially designed blade and handle. Handles are available in stainless steel, non-sterile, and individually packed. Blades shapes 10, 11, 15 and 20 in stainless steel, sterile, individually V.P.I. protected in metal foil packets, and boxed in units of 50. PM40 Post-Mortem Range Handles The PM standard and stainless handles have a screw type fitting to secure the blade in position and are supplied individually packed. The non-sterile PM40 and PM40B blades are designed to fit the PM handles. Blades are individually V.P.I. protected in metal foil packets and boxed in units of 10. There is also a convenient disposable scalpel option with protective guard available in units of 5 and 100. Post-Mortem PM8 Handle & PM60 and PM60B Blades Long Midi Further extending the post-mortem range, the PM60 and PM60B blades offer the ease of attaching to a PM8 handle in a traditional manner. Both blade shapes are individually V.P.I. protected in single peel packets and boxed in units of 50. Handles are supplied individually packed. For more information about Cygnetic, KLEEN and our range of Sharps Safety products refer to our website at: www.swann-morton.com Requiring no handles, the standard stitch cutter is in carbon steel, the midi and long versions in stainless steel. The No.3 stainless stitch cutter can be used in conjunction with a No.3 handle for more aseptic techniques. Available individually packed in metal foil packets and boxed in units of 100. All items are shown actual size Our suite of training films are available at: http://www.swann-morton.com/interactive.php Cervical Biopsy Blade Cygnetic® (Showing the Attach/Detach position In stainless steel, sterilised, and supplied in single plastic trays, boxed in units of 10. Fits the Long and Short Swann Major Handles which can be viewed on the website. “Swann-Morton” and the ‘ring pattern’ logo are registered trademarks of Swann-Morton Limited and related companies. The products shown are manufactured for use by trained health care professionals and can cause injury if used or handled incorrectly. The information and illustrations used in connection with the products shown on this leaflet are for general guidance only and users must seek proper training and instruction in their use before using or handling such products. Swann-Morton Limited exclude all liability for injury to