Stitch Cutter

Stitch Cutter

Product catalog summary
Introduction
Swann-Morton is a leading manufacturer of surgical blades, known for their registered trademarks. Their products are intended for use by trained healthcare professionals and can cause injury if mishandled. Proper training is essential before use.
Product Overview
The leaflet describes sterile stitch cutter blades available in carbon steel and stainless steel, designed for use without handles. They are individually foil-wrapped and sold in packs of 100. These cutters are suitable for outpatient clinics, emergency departments, hospital wards, general practice, and community nursing.
Usage Guidelines
Skin sutures are typically removed five to eight days after application, with facial sutures removed sooner. Absorbable sutures may not require cutting, but non-absorbable ones do. The stitch cutters are simple to use, but staff must be familiar and confident in their use.
Procedure for Using Stitch Cutters
  1. Clean the area with an appropriate solution if necessary. Hold the free end of the suture and slide the stitch cutter under it, keeping it flat against the skin.
  2. Rotate the cutter gently upwards to contact the suture material near the skin entry point.
  3. Pull the suture out carefully, ensuring the exposed section is not drawn through the wound to avoid contamination and infection risk.
Compliance and Contact Information
All medical devices comply with the Medical Device Directive 93/42/EEC. For more information, contact Swann-Morton Ltd. at their Sheffield address or visit their website.
See more

Catalog excerpts

Stitch Cutter-1

ONE OF THE WORLD’S LEADING SURGICAL BLADE MANUFACTURERS Stitch Cutter Convenient and cost effective our range of Sterile Stitch Cutters are ideal for use in ‘Out Patient clinics’, within ‘Accident and Emergency departments’, on ‘Hospital Wards’, in ‘General Practice’ and for ‘Nursing in the Community’. Skin sutures generally are removed from five to eight days after application, with sutures on the neck or face generally being removed slightly sooner. Absorbable sutures lose enough strength in that period that they can often be removed without cutting, but non-absorbables will need to be cut out. Although the Stitch Cutters are simple to use it is essential that all staff are both familiar and confident in using them. MARK CLARKE/SCIENCE PHOTO LIBRARY 1 If necessary clean the area thoroughly with an appropriate solution. Hold the free end of the suture then slide under the Stitch Cutter so it lies flat to the patients skin. 2 Rotate the stitch cutter gently upwards so that the cutting edge contacts the suture material as close as possible to where it enters the skin. 3 Gently pull the suture out ensuring that the section which has been exposed to the outside world is not drawn through the wound thus introducing potential contamination and an increased risk of post infection. DR. CHRIS HALE/SCIENCE PHOTO LIBRARY Stitch Cutter Blades - Sterile Requiring no handles, the Standard Stitch Cutter is in Carbon Steel, the Midi and Long version in Stainless Steel. Available individually foil-wrapped in sterile pack of 100. Midi Long Stainless All medical devices comply with the Medical Device Directive, 93/42/EEC as referred by Part II of The Medical Devices Regulations 2002, Annex II excluding section 4 (as modified by Part 2 of Schedule 2A to The Medical Devices Regulations 2002) Scan this code for more product information Swann-Morton and the ‘ring pattern’ logo are registered trademarks of Swann-Morton Limited and related companies. The products shown are manufactured for use by trained health care professionals and can cause injury if used or handled incorrectly. The information and illustrations used in connection with the products shown on this leaflet are for general guidance only and users must seek proper training and instruction in their use before using or handling such products. Swann-Morton Limited exclude all liability for injury to the extent permitted by law. Swann-Morton Ltd. Penn Works, Owlerton Green, Sheffield S6 2BJ Telephone: +44 (0)114 2344231 Email: [email protected]

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.