Tube Sewing Unit 200 A/AF
2Pages

1952-2020 Svegea of Sweden AB. All rights reserved. SVEGEA OF SWEDEN The widest range of band-cutting machines Tube Sewing Unit 200A/AF The Svegea Sewing unit 200A/AF sews open fabric into a continous tubular piece, This is the first stage required to produce Bias Binding. The unit is easy to use, requiring minimal operator assistance. The Sewing Process • Open with fabric (up to 200cm/78") passes through a folder. • Folded edges are automatically aligned, prior to seaming. • Excess fabric is trimmed away during sewing. • An in line heated iron, irons the sewn seam. •Thefabric is re-rolled (200A). •The fabric is flat folded (200AF). Svegea of Sweden AB Junogatan 5, SE-451 42 Uddevalla, SWEDEN Tel: +46 522 368 00 • Email: info@svegea.se • Website: www.svegea.se

• Preset stitch counter (for lock stitch, to eliminate the risk of bobbin thread running out). • Thread break detector. • Vacuum unit to remove excess trimmed material. • Electronic machine speed regulator. • Automatic photo cell edge alignment. • Variable stitch length. Sewing head Maximum open width Maximum roll diameter 230 V, single phase, 50/60 cycles 6 bar Machine dimensions Floor space Net weight Other dimensions on request Specifications and appearance are subject to change without prior notice for improvements.