SVAN 956 Advanced Vibration Analyser
2Pages

SVAN 956 Vibration Meter & Analyser FEATURES FFT real time analysis - up to 1600 lines with Hanning window Parallel acceleration, velocity and displacement measurements Three parallel independent profiles of the meter mode Built-in machine filter (10 Hz ÷ 1 kHz) meeting ISO 10816 requirements Time domain signal recording to the USB Memory Stick Human Vibration measurements with Type 1 accuracy (ISO 8041) 1/1 octave real time analysis 1/3 octave real time analysis RPM measurements Balancing of the rotation mass Advanced Data Logger including spectral analysis Programmable measuring "route" USB Memory Stick providing almost unlimited logging capacity Advanced trigger function AC output: direct & D/A converter Easy in use USB 1.1 Host & Client interfaces RS 232 and IrDA interfaces Hand held, light weight and robust case Power supply by four AA rechargeable or standard batteries INSTRUMENTATION FOR SOUND & VIBRATION MEASUREMENTS The SVAN 956 is all digital, Type 1 vibration level meter along with analyser. Instrument is intended to general vibration measurements, machinery condition monitoring, occupational health and safety monitoring. It can be used by consultants, maintenance services and industry R&D departments etc. Instrument provides parallel acceleration, velocity and displacement measurements. Three vibration profiles allow parallel measurements with independently defined filters and RMS detector time constants. Each profile provides significant number of results (like RMS, Peak, Peak-Peak, VDV, MTVV or MAX). Advanced time history logging for each profile provides complete information about measured signal in non-volatile 32 MB internal memory or external USB Memory Stick and can be easy downloaded to any PC using USB interface and SvanPC+ software. All required weighting filters (e.g.: Wk , Wc , Wh for Human Vibration measurements or VelMF for machine diagnostic measurements) including the latest ISO 2631-1&2 and ISO 10816 standards are available with this instrument. RMQ detector enables direct measurement of the Vibration Dose Value (VDV). For machine condition maintaining application the SVAN 956 instrument provides programmable "route" of the measuring points. Using computational power of its digital signal processor the SVAN 956 instrument can additionally perform real time FFT analysis, 1/1 octave analysis, 1/3 octave analysis, balancing of rotation mass and sophisticated enveloping analysis. The SVAN 956 offers also RPM measurement with Monarch laser tachometer parallel to the vibration measurement. The time domain signal recording on the external USB memory stick is available. The instrument can be controlled and the measurement results can be also downloaded to any PC using the RS 232 or IrDA interfaces. Instrument is powered from four AA standard or rechargeable batteries (separate charger is required). The powering of the instrument from the External DC power source or USB interface is also provided. Robust case and light weight design accomplish the exceptional features of this new generation instrument. .c

TECHNICAL SPECIFICATIONS Continuous product development and innovation are the policy of our company. Therefore, we reserve the right to change the specifications without prior notice. V I B R A T I O N L E V E L M E T E R & A N A L Y S E R Standards ISO 10816, ISO 8041:2005, IEC 61260 Results RMS, Peak, Peak-Peak, VDV, MTVV or MAX, Time History Simultaneous measurement in three profiles with independent set of filters and detector time constants Weighting Filters HP1, HP3, HP10, Vel1, Vel3, Vel10, VelMF, Dil1, Dil3, Dil10, KB RMS Detector Digital True RMS detector with Peak detection,...