SVAN 955 Single Range Sound Level Mete
2Pages

SVAN 955 Low Cost Sound Level Meter & Analyser FEATURES Type 1 sound level measurements meeting IEC 61672:2002 Single measurement range in meter mode Three parallel independent profiles 1/1 real-time octave analysis Free-field & diffuse-field measurements Advanced Data Logger, up to 12 results logged simultaneously including spectra Time-history recording on USB Memory Stick providing almost unlimited logging capacity All weather measurements with SA 203 microphone protection kit Acoustic dose meter Advanced trigger and alarm functions USB 1.1 interface (real-time PC “front end” application) USB 1.1 Host interface RS 232 interface for modems support (GPRS, Ethernet, WLAN) Integration time programmable up to 24 h Power supply by four AA rechargeable or standard batteries Hand-held, light weight and robust case Easy in use INSTRUMENTATION FOR SOUND & VIBRATION MEASUREMENTS The SVAN 955 is all digital, Type 1 sound level meter. Instrument is intended to general acoustic measurements, environmental noise monitoring, occupational health and safety monitoring. Three acoustic profiles allow parallel measurements with independently defined filters and RMS detector time-constants. Each profile provides significant number of results (like Leq, LMax, LMin, LPeak, Spl, SEL etc.). Using computational power of its digital signal processor the SVAN 955 instrument can, simultaneously to the meter mode, perform real-time 1/1 octave analysis including statistical calculation. Advanced time-history logging for each profile provides complete information about measured signal in non-volatile 16 MB internal memory or external USB Memory Stick and can be easy downloaded to any PC using USB interface and SvanPC+ software. Acoustic dosimeter function is available with the SV 25_2 dedicated microphone. Fast USB 1.1 interface (12 MHz) creates real-time link for the PC “front-end” application of the SVAN 955 instrument. It can be controlled and the measurement results can be also downloaded to any PC using the RS 232 or IrDA interfaces. Instrument can be offered with GPRS modem, LAN & WLAN connection module. Together with SvanPC+_RC remote communication software, these interfaces provide easy remote access to instrument settings & data over internet and local area network. Instrument is powered from four AA standard or rechargeable batteries (separate charger is required). The powering of the instrument from the external DC power source or USB interface is also provided. Robust case and light weight design accomplish the exceptional features of this new generation instrument. .com

TECHNICAL SPECIFICATIONS B A S I C D A T A Main result in one-profile view 1/1 octave analysis Time-history plot Continuous product development and innovation are the policy of our company. Therefore, we reserve the right to change the specifications without prior notice. SVANTEK Sp. z o. o. ul. Strzyg³owska 81 04-872 WARSAW, POLAND phone/fax (+48) 22 51 88 320, (+48) 22 51 88 312 http://www.svantek.com e-mail: office@svantek.com.pl DISTRIBUTOR: ISO 9001 CERTIFIED Standards Type 1: IEC 61672-1:2002 Meter Mode Leq, Spl, SEL, LEP,d, Lden, Ltm3, Ltm5, Statistics - Ln (L1- L99), LMax, LMin,...