Data sheet QIOTM - CAN I/O Converter DOC-0002782 Rev B The QIOTM - CAN I/O converter is mainly designed to be used as an input signal converter in a machine equipped with CAN joysticks. QIOTM - CAN I/O Converter is used to convert CAN data into analog or digital signals (or vice versa) and make them available to other receiving systems or to directly control a function. Main features • • • • Ensures that the original functions in an excavator can be maintained when replacing original joysticks to CAN joysticks for extended functionality, for example when installing a tiltrotator. Make it possible to shift between functions using the same controls, such as a button or a roller, when there isn´t enough controls for all functions Simplifies expansion of the functionality of an excavator without needing to replace joysticks several times. Makes CAN-signals from joysticks available and configurable so that multiple receiving systems may share the same joystick. Supports: CANOpen, J1939, SVAB MACS, Raw CAN Flexible configurable logic with high degree of safety Configured through CANopen SDO Digital /analog inputs Relay outputs Analog outputs Output utpp Output utpp SVAB Hydraulik AB Ulvsättersgatan 2 SE-694 35 Hallsberg Sweden Phone: +46 582 152 30 www.svab.se [email protected]

The QIOTM - CAN I/O Converter is easily configured through parameters set through the CANopen SDO protocol. EDS file and programming manual is obtained from SVAB. When the QIO™ - CAN I/O Converter is installed and connected to a tiltrotator control system developed by SVAB, it is most easily configured via SVAB's Quantum Service Tool, which can be downloaded from the App Store for tablets. The QIO™ - CAN I/O Converter is intended for inside use. Thanks to its slim housing, it is easy to install and hide even in the consoles of a cab where space is limited. The device is easily attached to the...

Output amplitude This information might change without prior notice SVAB Hydraulik AB Ulvsattersgatan 2 SE-694 35 Hallsberg Sweden Phone: +46 582 152 30 www.svab.se [email protected]

Compliance and standardsCOMPLIANCE RoHs Mechanical vibration/Mechanical shock ISO 16750-3 Class L Operating temperature and climatic condition ISO 16750-4 Class B Chemical loads ISO 16750-5 Class B This information might change without prior notice SVAB Hydraulik AB Ulvsattersgatan 2 SE-694 35 Hallsberg Sweden Phone:+46 582 152 30 www.svab.se [email protected]