OPERATOR CONTROLS FOR HEAVY DUTY EQUIPMENT The key to an efficient and ergonomic operator environment

OUR OFFER We offer both highly configurable and ergonomic joystick grips and an electronic joystick base. The grips and base can be ordered separately or combined and are well suited and tested for heavy duty equipment.

With SVAB Grip L8 we set a new standard in joystick grips. The L8 grip allows you to ergonomically control two roller functions simultaneously using your thumb and index finger. The markets most configurable grip for machines ROLLERS The L8 is the multifunction ergonomic joystick grip that has set a new standard with its innovative, functional design. You can control two roller functions simultaneously with your thumb and index finger. Up to three rollers can be installed, two for the thumb and one for the index finger. On the grip there is room for up to nine buttons, which means that most functions...

Technical Summary - The joystick base is developed in accordance with the Machinery Directive and the safety standards ISO 13849 and IEC 61508. The eJB can be used to control functions with safety levels up to PLd or SIL 2. Technology: Contactless detection via moving magnets and magnetic hall sensors. Protection class electronic: IP 67 Protection class mechanical: IP 5X CAN protocol: CANopen or CAN J1939 - Electronic joystick baseRobust, safe and ergonomic electronic joystick base for modern electro-hydraulic excavators The eJB is a robust and safe electronic joystick base designed for remote...

Technical Information for the SVAB Grip L8 standard range and electronic joystick base © 2021 SVAB Hydraulik AB. All rights reserved. SVAB accepts no responsibility for possible errors in catalogs, brochures and other printed material. SVAB reserves the right to alter its products without prior notice. This also applies to products already ordered provided that such alterations can be made without affecting agreed specifications. All trademarks in this material are properties of their respective owners.

1.  L8 GRIP - GENERAL TECHNICAL DATA SVAB GRIP L8 DIMENSIONS (in millimeters) AND TECHNICAL DATA The development of the SVAB Grip L8 joystick grip comes from long experience and ergonomic studies which has given the L8 great comfort and functionality. Features Ergonomically designed. Rubberized surface. The signals from hall effect controls and electromechanical switches can be converted to CAN data. For further information regarding the CAN protocols please request the documentation “SVAB L8 CAN Profile” from SVAB. Configurable. Possibility to extend or shorten the pulse to compensate for signal...

3. L8 CABLES 4. PROPORTIONAL ROLLER SVAB Grip L8 cables are available for both analog / digital signals as well as for CAN bus / PWM communication. It's possible to combine analog / digital and CAN bus / PWM cables in the same joystick grip. Our cables consists of high-performance insulation and sheath materials which cover a wide temperature range and are highly resistance to chemicals and abrasion. Cables are also well protected by a braided polyester sleeving which adds further mechanical resistance. We refer direct outputs from Hall Effect controls as analogue signals. Direct outputs from...

DIMENSIONS (in millimeters) AND TECHNICAL DATA TECHNICAL DATA Features • Momentary snap-action. • Tactile feedback. • Wide range of appearances. • Long Life. Agency approvals 14 Description Pushbutton with maintained action. A good option when a distinct remaining button press is desired. When pressing the button it remains in its pressed state until the button is pressed again. Mechanical / Electrical Insulation resistance Materials Case Button Contacts Available buttons

6. TOGGLE SWITCHES, ROCKERS AND MINI JOYSTICKS TOGGLE SWITCH MINI JOYSTICK DIMENSIONS (in millimeters) AND TECHNICAL DATA DIMENSIONS (in millimeters) AND TECHNICAL DATA Agency Approvals / Preferential List Initial contact resistance Materials Case Environmental Operating temperature Description Compact 5-way navigation thumb control. Tactile feedback in all directions & pushbutton. Shock, vibration & salt spray resistant. 1 million lifecycles. Sealed to IP69K. Environmental Front Panel Sealing Electrical Electrical Function Mechanical Expected Life Materials Sealing Gasket

ISION OF T APPLICABLE OF HAZARDOUS ASTE , EVALUATION, DIMENSIONS (in millimeters) AND TECHNICAL DATA The L8 joystick grip is attached on the joystick base with adapters. The adapters comes in different types and can be fitted on a large variety of joystick bases. Compact 3-way rocker switch marked with F (forward), N (neutral) and R (reverse). NEUTRAL BLUE VIOLET RED BLUE PURPLE RED GREEN GRAY YELLOW GREEN GRAY YELLOW Temperature range: TOLERANCES: WHITE .XX (POLE 2) .03 SPDT - (ON)-OFF-ON WIRED SCHEMATIC DESCRIPTION SPECIFIED: DIMENSIONS ARE IN INCHES. K1S, ROCKER SWITCH DPST - (ON)-NONE-ON...

FIXED ADAPTERS DIMENSIONS (in millimeter) Accessories for SVAB Grip L8 joystick. Among the accessories you will find bellow holders and a hand-rest. Description Adapters with fixed angles that fits a wide range of joystick bases. Comes in two main variants. The straight adapter and a 13° fixed angled adapter. The straight adapter is currently available in M14x2 thread. The angled adapter is currently available in M10, M12, M14 and M14x1,5 threads. Robust design Easy installations with fixed adapters Angles proven to be well suited for many machines CIRKULAR BELLOW F HOLDER FOR BALL JOINT ADAPTER...

8.2 HAND-REST RECTANGULAR BELLOW E HOLDER FOR BALL JOINT ADAPTER the bellow of the joystick base to the joystick grip. This bellow holder is compatible F Dwith the ball joint adapter. The hand-rest can be tilted as you prefer and allows free adjustment inward, outward, forward and backward thanks to its mounting system. The lower palm rest is adjustable in 5 different height positions which makes the hand-rest adaptable to different hand sizes. Material: PC/ABS The hand-rest can easily be retrofitted to any L8 configuration. The hand-rest increases comfort, relieves the hands and reduces the...