*mydirectindustry

GP Controller

Product catalog summary

Overview: The GP Controller (GPC) is a versatile control unit designed for safe and flexible proportional control of various construction machines. It features configurable I/O ports and a display for configuration and diagnostics.

Technical Specifications:

Nominal Voltage: 12 and 24 V
Supply Voltage Range: 9 to 30 V
Operating Temperature: -40 to +70 °C
Storage Temperature: -40 to +85 °C
Case Material: Aluminium
Mass: 220 g
CAN Bus: SVAB proprietary with 620 Ω termination resistance
Current Consumption: Internal fuse 10A
Electromagnetic Compatibility: ISO 13766:2006

Inputs and Outputs:

Analog Voltage Inputs: Full supply range, 0 to 5 V, 10 kΩ resistance, 10 Bit resolution
Digital Inputs: Configurable for active high/low signals, 10 kΩ resistance
Outputs: High side outputs for inductive loads, max current 2.75 A for outputs 1-5, 2.5 A for outputs 6-9

Mounting Instructions: Install inside the cabin on a flat surface with visible display. Use bonding mounting plate if drilling is not possible. Ensure safe placement to avoid driver injuries.

Connectors:

Left Input Connector: Molex Microfit 3.0 14-way for analog and digital inputs
Right Input Connector: Molex Microfit 3.0 14-way for additional inputs
Supply/Valve Connector: Molex Minifit Jr. 8-way for power supply and outputs
Valve Connector: Molex Minifit Jr. 18-way for outputs

Compliance: Developed in accordance with EMC Directive - 2004/108/EG.

Catalog excerpts

GP Controller (GPC) is a control unit designed for flexible and safe proportional control of many types of constructions machines. The GPC has I/O ports that can be configured for variable control of most machines and by different operators. It is also equipped with a display for configuration and diagnostics.

Open the catalog to page 1

Left Input Connector (Molex Microfit 3.0 14-way) A Supply/Valve Connector (Molex Minifit Jr. 8-way) C Right Input Connector (Molex Microfit 3.0 14-way) B Valve Connector (Molex Minifit Jr. 18-way) D SVAB Hydarulik AB - Ulvsattersgatan 2 - SE 694 91 Hallsbeig - SWEDEN - +46 582 152 30 - www.svab.se © 2015 SVAB Hydraulik AB. All rights reserved. SVAB accepts no responsibility for possible errors in catalogs, brochures and other printed material. SVAB reserves the right to alter its products without prior notice. This also applies to products already ordered provided that such alterations can be...

Open the catalog to page 2

GP Controller

GP Controller

Catalog excerpts

All SVAB Hydraulik AB catalogs and technical brochures