JONO cone crushers are widely used in cement plants, mines and the sand and gravel industry. Suitable for secondary and tertiary crushing of various mining rocks, such as granite, limestone, pebbles, basalt, etc. High crushing ratio, high efficiency, low energy consumption, uniform product grain size. Transport Size Graph 3500 Transport Size (L*W*H)(mm) ADVANTAGES & HIGHLIGHTS Smart Design The HP series multi-cylinder cone crusher has a high degree of automation and delivers uniform product grain size. Good anti-iron protection and automatic cavity clearing mechanism separates the moving cone from the main shaft and increases the number of cone swings and rotations, significantly increasing productivity. Integrated Chassis Design The processing capacity of the machine can be increased significantly. The vibrating feeder of pre-screening module is optional, which screens out the qualified finished product from the raw material in advance. This increases the processing capacity of the machine and reduces the powder content of the finished product. Quick Adjustment System The discharge unit of the crusher is equipped with a hydraulic adjustment device. The size of the discharging port can be quickly adjusted to meet the needs of different crushing ratios. Motor Power(Kw) Optional Pre-screening Unit Main Conveyor TECHNICAL PARAMETERS The machine and the drive motor are built on a monolithic base frame. The vibration damping pads are arranged in the lower part of the base frame to isolate the vibrations of the product during the operation of the crusher and to cushion the internal forces of the product during the operation of the machine. Max. Feed Grain Size （mm） Width of Discharging Port(Adjustment Range)(mm) Electric Motor Power (Kw) Capacity (t/h) Receiving Material Height (mm) Hopper Volume(m³) Whole Machine Power Unit Crusher Feeding Hopper YOUR GREEN BUSINESS IMPLEMENTOR JONO TRACKED CONE CRUSHER Transport Size (L*W*H)(mm) Power(Kw) Screening System Finished Product Conveyor Return Material Conveyo