PRODUCT INTRODUCTION EDDY CURRENT SEPARATOR The Eddy Current Separator (ECS) is an advanced metal sorting unit that is capable of separating non-ferrous metals such as aluminium, copper, brass, alloy from dry recyclables. JONO eddy current separator can produce higher purity and increased yield of better separation of aluminum cans from PET plastic beverage containers.Nowadays it became the most economical beverage bottle sorting and recycling equipment. ORKING PRINCIPLE The principle of eddy current separator is to magnetic field area of the magnetic roll, the force separate conductor from non-conductor by using is generated by cutting the magnetic induction the transformed magnetic field of conductor to line. When the material is discharged from the produce force. high-speed belt, the force causes the metal to be The magnetic idler is equipped with high-speed belt discharging end which rotates at high speed when the equipment is running. And the waste is distributed on the surface of the belt after entering the high-speed belt. When the metal enters the thrown out and fall into the non-ferrous metal area. Non-ferrous metals fall freely into non-ferrous metal areas. Eccentric magnetic pole technology can effectively ensure the separation rate and processing capacity.

ECHNICAL DATA Eddy current magnetic roll motor Belt gear motor Belt maximum velocity Capacity Belt width Machine Size Weight Including 5250kg 2 sets of Mitsubishi frequency converter, 1 set of Siemens PLC, etc *Through capacity can vary depending on the material. FEATURES High separation performance.It can separate as small material as the size of 2-5mm, which could reach the separation rate of 95%. Due to consistent optimization, the model work with lowest downtime. The compact machine structure make it need only small space. Use-friendly. It’s very easy to operate and maintai