Disc Screen - Jono

Disc Screen - Jono

Disc Screen - Jono

Product catalog summary
Introduction
The disc screen is a crucial sorting machine used to separate materials into large and small sizes. By adjusting the screening size, it can effectively separate desired materials, commonly used in processing municipal solid waste (MSW) to separate organics or refuse-derived fuel (RDF).
Working Principle
The machine operates with main shafts driven by an electric motor, rotating in one direction within the screening chamber. As materials enter, they are scattered by rotating disc plates. Smaller materials fall through screening holes formed by adjacent shafts and plates, while larger materials pass over the screen. This size-controlled screening allows for effective separation based on material size.
Product Specifications
  • Model: 1FDS1590A and 1FDS1560A
  • Speed: 68 rpm
  • Ambient Temperature: 0°C to +45°C
  • Voltage: 3x380 V±5%/50 Hz
  • Control Panel: 9-inch Siemens touch screen HMI
  • Screen Hole Size: 40-100mm
  • Input Size: <350mm
  • Throughput Capacity: 70-150m³/h
  • Screening Availability: 80%-95%
  • Weight: 18t for 1FDS1590A, 12t for 1FDS1560A
Features
  • Constructed with high-quality wear-resistant steel for durability.
  • Finely processed screen plates to prevent material sticking.
  • Quincunx shaped screen plates enhance material conveyance and prevent jamming.
  • Screen unit angled at 0 to 4 degrees for optimal material retention and screening.
  • Equipped with electrical overload protection to prevent damage.
  • Easy replacement of wear and spare parts.
  • Wear-resistant lining plate disc structure prevents leakage and jamming.
  • Sequential start-up of screen shafts ensures efficient operation under load.
See more

Catalog excerpts

Disc Screen - Jono-1

PRODUCT INTRODUCTION DISC SCREEN As one of the most important sorting machines, disc screen separates material into big-sized material and small-sized material. By changing the screening size, you can always separate out what you need.Typically,it is applied in treating MSW,in process of which organics or RDF can be well separated out. ORKING PRINCIPLE Driven by the electrical motor, main shafts running neighbor main shafts and the neighbor screen in one direction in the screening chamber. When plates.Material that is bigger than the screen hole material goes into the disc screen, the material is will pass disc screen. With the knowledge that firstly scattered by the rotating disc plates. Then different material has different size range,the along with the movement of material on the disc material can be separated by this size-controlled plates, the small-sized material drops down through the screening hole formed by the

 Open the catalog to page 1
Disc Screen - Jono-2

ECHNICAL DATA Model Shaft quantity Shaft diameter(mm) Geared motor(KW) Speed of main shafts Ambient temperature Control panel 9 inch Siemens touch screen HMI Shaft unit 0.45m cylinder + wear-resistant plum plate Screen hole Input size Throughput capacity Screening availability FEATURES Quincunx shaped screen plates are well arranged, The screen unit is placed at an up angle of 0 to 4 which not only benefits the conveying of the material, degrees, so that the material is stored for a longer but also avoid the jamming caused by the material. period screened sufficiently. The disc screen is started...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.