*mydirectindustry

HST - N series

Product catalog summary

Overview: The HST-N series utilizes an advanced tube fin design to enhance heat dissipation by increasing the heat exchange area, significantly improving performance compared to traditional straight pipe designs.

Product Features:

Six processes water cooling system.
Compact size with a large heat exchange area.
Designed for European export, requiring high water quality and potentially necessitating filters.
Water-saving design.

Product Specifications:

Selection curve based on specific conditions: Oil ISOVG32, oil inlet temperature at 60℃, water inlet temperature at 32℃, oil/water ratio of 6:1, and a 6-channel structure.
Oil side pressure loss ranges from 0.1 Mpa (1 bar) to 0.15 Mpa (1.5 bar).
Water side pressure loss ranges from 0.01 Mpa to 0.1 Mpa (0.1-1 bar).

Additional Information: For more details, visit the product link: HST-N Series Product.

Catalog excerpts

(1) Adopt advanced tube fin design to increase the heat dissipation area. Make the cooling medium fully heat. Compared with the traditional straight pipe heat dissipation performance, the heat dissipation effect is obviously improved. Product features 1. Six processes water cooling 2. Small volume and large heat exchange area 3. European export type, high water quality requirements, when necessary to install filters 4. Save water

Open the catalog to page 1

Hst-n Series Selection curve (6 channels) The curve is based on the following conditions Oil ISOVG32 Oil inlet temperature 60°C The inlet temperature of water is 32°C Oil/water ratio 6:1 Structure 6 channel Oil side pressure loss = 0.1mpa (1bar) = 0.15 Mpa (1.5 bar) Water side pressure loss 0.01Mpa-0.1mpa (0.1-1bar)

Open the catalog to page 3

page 4 / 4 Powered by TCPDF (www.tcpdf.org)

Open the catalog to page 4

HST - N series

HST - N series

Catalog excerpts

All Suzhou Hopen Fluid Equipment Co., Ltd. catalogs and technical brochures