*mydirectindustry

Catalogs
Suzhou Honpine Precision Industry Co., Ltd.
Factory Direct Planetary Gear Reducer

Factory Direct Planetary Gear Reducer

Product catalog summary

Overview: Suzhou Honpine Precision Industry Co., Ltd offers a range of Economy Line planetary gearboxes designed for cost-efficiency and high performance. These gearboxes are lightweight, powerful, and utilize low-friction bearings to enhance efficiency. They are robustly constructed and optimized for demanding, high-duty production cycles.

Product Series Introduction: The gearboxes are available in various series, each offering different specifications:

MYA Series: Sizes from 42mm to 220mm with a rated output torque of 14Nm to 2000Nm. Backlash options include ≤ 2, ≤ 4, ≤ 6 arcmin.
MYD Series: Sizes range from 47mm to 255mm with similar torque ratings and backlash options as the MYA series.
MYB Series: Sizes from 42mm to 220mm, with torque ratings from 40Nm to 650Nm and backlash options of ≤ 6 arcmin.
MYC Series: Sizes from 42mm to 142mm, with torque ratings from 14Nm to 650Nm and backlash options of ≤ 13 arcmin.

Technical Specifications:

Gear Ratios: Single-stage ratios range from 3 to 10, while two-stage ratios range from 12 to 200.
Backlash Classes: Include ultra-precision, precision, and standard backlash.
Output Shaft Types: Options include smooth straight shaft (S1) and straight shaft with keyway (S2).
Motor Compatibility: Various motor models and brands are supported, with specifications for rated and maximum output torque, input speed, and more.

Performance and Durability: The gearboxes are designed for high efficiency, long service life, and can operate in various directions. They are lubricated with synthetic grease and have a high protection level against environmental factors.

Contact Information: For more details, visit the website at www.hobpine.com or contact via email at [email protected] or [email protected]. Phone: +86 189 9432 9920.

Gearbox Types and Output Shaft Options: The document outlines two main types of output shafts: S1, a smooth straight shaft, and S2, a straight shaft with a keyway. These options are available across different gearbox models such as MYB, MYBr, MYG, MYGr, MYF, and MYFR.

Motor Models and Brands: Various motor models are listed, with specific brands and models mentioned, although not detailed in this excerpt.

Technical Specifications: Key specifications include maximum output torque, rated input and maximum input speeds, backlash, torsional rigidity, allowable radial and axial forces, service life, efficiency, weight, operating temperature, lubrication, protection level, installation direction, and noise values. These parameters are crucial for determining the suitability of a gearbox for specific applications.

Dimensional Information: Outline dimension sheets are provided for each model, detailing the physical dimensions necessary for integration into mechanical systems.

Conclusion: This document serves as a comprehensive guide for selecting the appropriate gearbox and motor configurations based on specific mechanical requirements and operational conditions.

Catalog excerpts

Suzhou Honpine Precision Industry Co., Ltd. Website: www.hobpine.com Email: [email protected] [email protected] Tel: +86 189 9432 9920 Economy Gearboxes At Suzhou Honpine Precision Industry Co., Ltd, our Economy Line planetary gearboxes offer a compelling combination of performance and value. Engineered for cost-efficiency, these gearboxes are lightweight yet powerful, utilizing low-friction bearings for enhanced efficiency. Their robust construction and optimized technical design make them ideally suited for demanding, high-duty production cycles.

Open the catalog to page 1

PRODUCT SERIES INTRODUCTION PRODUCT SERIES INTRODUCTION MYA Series Offered in 7 optional sizes Offered in 7 optional sizes Offered in 7 optional sizes Offered in 5 optional sizes MYAR Series MYDR Series MYBR Series MYCR Series Offered in 7 optional sizes Offered in 7 optional sizes Offered in 5 optional sizes Offered in 4 optional sizes MYB-E Series MYG-E Series Offered in 6 optional sizes Offered in 5 optional sizes Offered in 7 optional sizes Offered in 4 optional sizes MYBR-E Series MYGR Series MYGR-E Series MYFR/MYER Series Offered in 6 optional sizes Offered in 4 optional sizes Offered in...

Open the catalog to page 2

Gearbox Types: Output Shaft Type Options: S1: Smooth straight shaft S2: Straight shaft with keyway Motor Models: Motor Brand & Model Gear Ratios: Backlash Classes: P0: Ultra-precision backlash P1: Precision backlash P2: Standard backlash

Open the catalog to page 3

OUTLINE DIMENSION SHEET /Output Diameter /Output Diameter SI * The input motor specific dimensions could be customised. * C1~C7are motorfmetric standard) specific dimensions, which could be customised.

Open the catalog to page 4

OUTLINE DIMENSION SHEET /Output Diameter /Output Diameter Dimension * C1~C7are motor(metric standard) specific dimensions, which could be customised. * C1-C7 are motor (metric standard)specific dimensions, which could be customised.

Open the catalog to page 5

OUTLINE DIMENSION SHEET /Output Diameter /Output Diameter si * C1-C7 are motor(metric standard) specific dimensions, which could be customised * C1-C7 are motor(metric standard) specific dimensions, which could be customised

Open the catalog to page 6

/Output Diameter * The input motor specific dimensions could be customised. Output Shaft Type Options: S1: Smooth straight shaft S2: Straight shaft with keyway Motor Models: Motor Brand & Model Gear Ratios: Backlash Classes: Ultra-precision backlash Precision backlash Standard backlash

Open the catalog to page 7

* The input motor specific dimensions could be customised.

Open the catalog to page 8

OUTLINE DIMENSION SHEET OUTLINE DIMENSION SHEET ■mtaj.u.bw ■MTOdfthHUkr ■MTAri.U.BW araias / output /Output Diameter /Output Diameter Dimension * C1~C7are motor(metric standard) specific dimensions, which could be customised. * C1-C7 are motor (metric standard)specific dimensions, which could be customised.

Open the catalog to page 9

Factory Direct Planetary Gear Reducer-10

OUTLINE DIMENSION SHEET OUTLINE DIMENSION SHEET MYAR-115-Lir fiASS / INPUT □C7 /Output Diameter /Output Diameter Dimension * C1-C7 are motorfmetnc standard) specific dimensions, which could be customised. * C1-C7are motor(metric standard) specific dimensions, which could be customised.

Open the catalog to page 10

Factory Direct Planetary Gear Reducer-11

OUTLINE DIMENSION SHEET OUTLINE DIMENSION SHEET IMY/A;aK,Hr IMYfcWJfcMir /Output Diameter /Output Diameter * C1-C7 are motor(metric standard) specific dimensions, which could be customised sea si aia S2 *The input motor specific dimensions could be customised. 10

Open the catalog to page 11

Factory Direct Planetary Gear Reducer-12

Backlash Classes: P0: Ultra-precision backlash P1: Precision backlash P2: Standard backlash Gear Ratios: Motor Brand & Model Example: MYD090-10-P2/MHMD-082G1U

Open the catalog to page 12

Factory Direct Planetary Gear Reducer-13

hdnpin: OUTLINE DIMENSION SHEET OUTLINE DIMENSION SHEET MYD-047-L1 * The input motor specific dimensions could be customised. * C1~C7are motor(metric standard) specific dimensions, which could be customised.

Open the catalog to page 13

Factory Direct Planetary Gear Reducer-14

OUTLINE DIMENSION SHEET 90909BQ OUTLINE DIMENSION SHEET * C1~C7are motor(metric standard) specific dimensions, which could be customised.

Open the catalog to page 14

Factory Direct Planetary Gear Reducer-15

OUTLINE DIMENSION SHEET OUTLINE DIMENSION SHEET ■B2HiaL1 * u-cim&tommis&imi&iLR-t. Rr«jgs^n*nas«t. * Cl ~C7 are motor(metrlc standard) specific dimensions, which could be customised. * C1-C7 are motor(metric standard) specific dimensions, which could be customised

Open the catalog to page 15

Factory Direct Planetary Gear Reducer-16

OUTLINE DIMENSION SHEET mydSlV Gearbox Types: Backlash Classes: Ultra-precision backlash Precision backlash Standard backlash * C1~C7are motor(metric standard) specific dimensions, which could be customised. Gear Ratios: Motor Models: Motor Brand & Model

Open the catalog to page 16

Factory Direct Planetary Gear Reducer-17

HONPINi MYDR OUTLINE DIMENSION SHEET * The input motor specific dimensions could be customised.

Open the catalog to page 17

Factory Direct Planetary Gear Reducer-18

OUTLINE DIMENSION SHEET OUTLINE DIMENSION SHEET myDr-Q aDEBEHL^ aDEBESB^ Dimension * C1~C7are motorfmetric standard) specific dimensions, which could be customised. * C1-C7 are motor (metric standardjspecific dimensions, which could be customised.

Open the catalog to page 18

Factory Direct Planetary Gear Reducer-19

HDNPINi OUTLINE DIMENSION SHEET OUTLINE DIMENSION SHEET MYDR-110-Lir YSRSEOH!^ Dimension * C1-C7 are motor(metric standard) specific dimensions, which could be customised. * C1~C7are motor{metric standard) specific dimensions, which could be customised.

Open the catalog to page 19

Factory Direct Planetary Gear Reducer-20

OUTLINE DIMENSION SHEET OUTLINE DIMENSION SHEET Dimension * C1-C7 are motor(metric standard) specific dimensions, which could be customised * C1~C7are motor(metric standard) specific dimensions, which could be customised.

Open the catalog to page 20

Factory Direct Planetary Gear Reducer-21

MODEL ILLUMINATE Gearbox Types: Output Shaft Type Options: S1: Smooth straight shaft S2: Straight shaft with keyway Motor Models: Motor Brand & Model Gear Ratios:

Open the catalog to page 21

Factory Direct Planetary Gear Reducer-22

^HONPINi OUTLINE DIMENSION SHEET OUTLINE DIMENSION SHEET /Output Diameter /Output Diameter A ttSS Si * The input motor specific dimensions could be customised. * ci-c7ji^sij#)t^jsas&K±R^. nr*ss^H3Ri&s6^«t. * C1~C7are motor(metric standard) specific dimensions, which could be customised.

Open the catalog to page 22

Factory Direct Planetary Gear Reducer-23

HONRIN OUTLINE DIMENSION SHEET yr. OUTLINE DIMENSION SHEET MYB-tTs-L^ /Output Diameter /Output Diameter ^ Dimension * Cl ~C7are motor(metric standard) specific dimensions, which could be customised. * C1-C7 are motor (metric standard)specific dimensions, which could be customised.

Open the catalog to page 23

Factory Direct Planetary Gear Reducer-24

HDNPIN OUTLINE DIMENSION SHEET OUTLINE DIMENSION SHEET /Output Diameter /Output Diameter ^ Dimension * C1-C7 are motor(metric standard) specific dimensions, which could be customised. * C1-C7 are motor(metric standard) specific dimensions, which could be customised

Open the catalog to page 24

All Suzhou Honpine Precision Industry Co., Ltd. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list