Catalogs >
Suzhou Ginier Machinery Technology Co., Ltd. >
Generally equipped with rigid nylon straight tube NA

Generally equipped with rigid nylon straight tube NA
1Pages

Catalog excerpts

Generally equipped with rigid nylon straight tube NA - 1

Tube Generally equipped with rigid nylon straight tube NA Products features NA tubes have good pressure resistance and can be used under high pressure conditions. ●The NA tube has shear marks every 500mm.In order to do the shear reference. *Shear marks are reference only and do not guarantee accurate dimensions ●NA tube can be customized to lengthen the order size specifications. ●It Can be used for hot water and heat transfer oil. It Can be used as a heat resistance water pipe, suitable, suitable for mold adjustment and assembly. Model representation method ③ Total length● of pipe ① NA: nylon tube。 ② Pipe size ③ Total length Type ② Pipe size ③ Total length of pipe 0425 D （Outer diameter）X Ø4XØ2.5 d （inner diameter）（mm）（m） black（B) red(R) yellow(Y) Fluid medium Air, water, heat-conducting oil (with certain conditions * 1-3) Maximum pressure range （MPa） Negative pressure range （kPa） Use the temperature range of（℃ ) Minimum bending radius （JIS)(MM) Minimum installation radius （VICE)（MM) Pipe Hardness（for reference only） Blasting pressure curve (reference value) Burst failure pressure matters need attention: * 1. When using water, please control the fluctuating pressure below the maximum pressure range. * 2. When using water, you must use the insert ring. * 3. Tap water can be used.Ask our department when using other water. * 4. The maximum pressure range is 20℃ at 65%RH.When used under other temperature conditions, Determine a sufficient safe enough value based on the above damage pressure curve.When the tube is used for vibration and bending condition

Open the catalog to page 1