Catalog excerpts


FOUR INDEPENDENT AXES - 30mm TRAVEL IN DIAGONAL FOR COAXIAL PIPETTE MOVEMENT, 25mm TRAVEL IN X, Y AND Z SUB-MICRON RESOLUTION TRUE DIAGONAL ASSURES COAXIAL MOVEMENT SUITED FOR IN VIVO ELECTROPHYSIOLOGICAL RECORDING QUIET MODE ELIMINATES ELECTRICAL NOISE USER-FRIENDLY, FANLESS COMPACT CONTROLLER WITH ROE PRESERVES BENCH SPACE PUSH BUTTON CONTROL OF MULTIPLE FUNCTIONS WORK, HOME, QUIET, PULSE AND RELATIVE ROBOTIC HOME AND WORK POSITION MOVES FOR EASY AUTOMATED PIPETTE EXCHANGE USB INTERFACE FOR COMPUTER CONTROL QUAD®, the newest Sutter Instrument motorized micromanipulator, is easy-to use and features four independent axes. Three axes provide the X, Y, Z-orthogonal motion typical of most motorized micromanipulators. In the QUAD, Sutter introduces a true fourth axis to move the electrode coaxially at exactly the desired angle of approach. The X, Y and Z axes have a 25 mm range of motion, and the fourth, diagonal axis, has 30mm of travel to significantly extend the reach of the system. The QUAD is very easy to operate. The ROE inputs for each axis allow facile manual control of electrode position. Five conveniently located buttons control all of the basic functions that you will need in normal operation. Press and hold the Work button to quickly store a work position; press Work again and the manipulator will return to the same location. Home sends the manipulator to an initial location that is useful for changing electrodes. When you are ready to begin collecting data, the motor drive, electronics can be suppressed by pressing Quiet. Display coordinates can be zeroed at any location by pressing Relative; go back to absolute coordinates by pressing Relative again. Finally, Pulse actives a pulse movement mode that produces small, rapid bursts of motion that can be advantageous for sharp electrode cell penetration. QUAD Basic System QUAD-L QUAD 4-axis manipulator - left-handed setup QUAD-R QUAD 4-axis manipulator - right-handed setup Fixed Stage Platform MT-78-FS Fixed platform stage with imperial/standard holes, chamber insert and gantry supports MT-78-FS/M6 Same as above with M6 tapped holes Manipulator Columns MT-75 Standard gantry stand 8.7 to 13.4 in (22.1 to 33.9 cm) MT-75S Short gantry stand 6.7 to 9.6 inches (16.9 to 24.4 cm) Accessories 285204 4 inch dovetail extension 221200 Mounting adapter plate 221165 Z-axis vertical extension BR-AW Rod holding clamp for XenoWorks injectors MP-ROD Rod holder One Digital Drive • Novato • CA 94949 • Phone 415.883.0128 Fax 415.883.0572 • Web www.sutter.com • Email info@sutter.com

Open the catalog to page 1

All SUTTER INSTRUMENT catalogs and technical brochures

  1. dPATC H ®

    2 Pages

  2. BV-10

    1 Pages

  3. P-1000

    1 Pages

  4. P-97

    1 Pages

  5. QUAD®

    1 Pages

  6. Sutter Catalog

    319 Pages


    108 Pages

  8. XenoWorks®

    1 Pages

  9. P-2000

    1 Pages