- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
S030
S030
The S030 Electrical Current Transmitter by SUTO is an AC RMS current sensor designed for measuring electrical current up to 3000 A AC. It features a flexible Rogowski coil connected to a digital converter, providing a 4-20 mA DC output proportional to the measured current.
Benefits
- Facilitates current sensing for load/unload analysis in compressors.
- Enables power and energy measurement.
- Assists in evaluating machine operation hours.
Key Features
- Easy installation and wide measuring range.
- Accurate current sensing with a typical error of less than 1% depending on conductor position.
- Robust IP67 casing suitable for industrial environments.
- 4-20 mA output signal for linear current measurement.
Applications
The transmitter is used for single-phase power measurements, allowing compressed air experts to calculate power consumption without additional voltage measurements, thus aiding in system efficiency analysis.
Ordering Information
The document provides specific order numbers for different models of the S030 transmitter, detailing the current range, diameter, and cable specifications.
Technical Data
- Measurement accuracy is 0.5% of reading plus 0.2% of range.
- Measuring range options: 10-1000 A AC or 30-3000 A AC.
- Analog output signal: 4-20 mA, with scaling from 0 A to 1000/3000 A AC.
- Voltage supply requirement: 10-32 VDC, with a maximum current consumption of 30 mA.
- Protection class: IP67, with CE approvals.
- Operating temperature range: 0 to +80 °C.
Catalog excerpts
Electrical Current Transmitter
Open the catalog to page 1
Benefits Easy installation Wide measuring range Accurate current sensing 4 ... 20 mA output signal IP67 casing provides robust protection in the industrial environment Accurate current measurement Position Sensitivity SUTO current sensor is an AC RMS current sensor composed of a flexible active part (Rogowski coil model) connected to a compact digital converter, capable of measuring the current carried on a power conductor up to a value of 3000 A AC. The digital converter supplies an output of 4 ... 20 mA DC in linear proportion to the measured current. Current Transmitter Application • Current...
Open the catalog to page 2
Operating conditions Ambient temperature Signal / Interface & Supply Analog output Signal Voltage supply Open wire ends / ODU connector This current transducer is intended for stand-alone applications. The signal is a 4 ... 20 mA output which cannot be connected to the S110 Power and Energy Meter. If you are looking for current transducers for the S110, please refer to the S110 order sheet. Ordering Please use the following table to assist in placing your order with our sales staff. S030 Electrical Current Transmitter Order No. Description S554 0155 Electrical Current Transmitter, 10 ... 1000...
Open the catalog to page 3All SUTO iTEC GmbH catalogs and technical brochures
S6005 Pages
S220 OEM5 Pages
S211 / S215 / S2205 Pages
S1205 Pages
S010 / S0113 Pages
OEM Products 202626 Pages
LMS3 Pages
Accessories6 Pages
(Re-)Calibration3 Pages
We are SUTO iTEC16 Pages
S230 / S2314 Pages
S217 OEM3 Pages
Portable Compressed Air5 Pages
Power and Energy Meter4 Pages
Atmospheric Sensor3 Pages
Temperature Transmitter2 Pages
Long Rang4 Pages
Product Overview Catalog24 Pages
Archived catalogs
Product Overview Catalog 202516 Pages
- Display module
- Suto Itec flow meter
- Temperature probe
- Volume flow monitor
- Liquid flow monitor
- Gas analyzer
- Industrial camera module
- Concentration analyzer
- Management software solution
- Industrial display panel
- Monitoring analyzer
- Data logger
- Resistance temperature sensor
- Analysis software solution
- Process software
- Real-time software
- Windows software
- Cloud-based software
- Waterproof flow meter
- Suto Itec gas flow meter