Introduction
The document discusses the upgrademaxLED conversion kit, designed for replacing old fluorescent tubes with modern LED light units from Oligo. This upgrade aims to enhance light quality and reduce energy consumption, maintaining Oligo's premium quality standards. It is particularly suitable for automotive sectors, including topcoat, assembly, and audit sites.

Specifications
The upgrademaxLED kit is available in various configurations, such as 3 x 20W, 3 x 25W, 4 x 20W, and 4 x 25W, with internal cabling and pre-existing connection systems. The dimensions and order numbers for each type are provided, ensuring compatibility with existing setups.

Features
The kit includes multiple LED light units with options for different color temperatures (e.g., 6,500 K and 4,000 K). It also features an electronic, digitally-dimmable LED controller. Installation must be performed by a qualified electrician.

Technical Specifications
The power options range from 20W to 40W, with an efficiency of 100 lm/W and a lifetime exceeding 50,000 hours. The kit operates within a temperature range of +5°C to +35°C and requires a rated voltage of 220-240 V. It has an IP20 degree of protection and a UGR limit of ≤20.

Quality and Safety
The kit meets photobiological safety standards (EN 62471:2008) and falls under risk group 1. It is LABS-free, CE labeled, and ENEC certified, ensuring high safety and quality standards.

Options
There are options for different color temperature compositions, allowing customization according to specific needs.