LED-SunLightOptiC

Product catalog summary

Overview: The document provides technical specifications and features of the LEDSLO (LED-SunLightOptic), a surface control optic used for detecting ultra-fine defects on highly reflective surfaces, particularly in the automotive sector.

Specifications:

Light Source: 6 x 17 watt LED lamps.
Dimensions: 284 x 1560 x 100 mm.
Weight: Approximately 20.5 kg.
Rated Voltage: 220-240 V, 50/60 Hz.
Ambient Temperature: +5°C to +35°C.
Degree of Protection: IP54.
Protection Class: I.
UGR Limit: ≤19.

Features:

Electronic, digitally dimmable LED controller.
Steel sheet housing with RAL7035 powder coating.
6 mm one-panel safety glass front with recessed outlet openings.
Frameless design with 3 quick-lock systems for opening.
Cable gland or direct clamping in junction box with a 3 m connection cable.

Options:

Available as an attachment light or with a mobile stand.
Pivotal design version available.
Additional housing colors according to RAL.

Quality Criteria:

Photobiological safety compliant with EN 62471, Risk group 1.
LABS-free and CE labeled.

Applications: Suitable for topcoat preparation, finishing, and audit sites in the automotive industry.

Catalog excerpts

LEDSLO - LED-SunLightOptic SIMULATED, BRIGHT SUNLIGHT Polishing defects Ultra-fine defects The surface control optic LEDSLO is used for surfaces with high reflection and can be employed in all coating processes in the industry. It projects very focused, multi-point light on a surface (sunlight simulation). Ultra-fine defects are visible with LEDSLO. Suitable for the following areas, especially in the automotive sector: topcoat preparation, finishing and audit sites design version) ▪▪ Electronic, digitally dimmable ▪▪ Steel sheet ▪▪ RAL7035 powder coated Front glass panel (lockable door) Rated voltage Permitted ambient temperature ▪▪ 6 mm one-panel safety glass according to EN 12150 with recessed outlet openings ▪▪ Frameless design ▪▪ Cable gland or direct clamping in junction box ▪▪ 3 m connection cable Protection class Technical specifications LABS FREE As an attachment light With mobile stand Pivotal design version available Additional housing colors according to RAL Light distribution curve of LEDSLO (LED SunLightOptic). This chart shows the light distribution curve of an LEDSLO with 6 x 17 watt. Exterior and mounting dimensions of the LEDSLO. All data in mm. Order number Connection system Harting connector system Quality criteria ▪▪ Photobiological safety (EN 62471): Risk group

Open the catalog to page 1

LED-SunLightOptiC

LED-SunLightOptiC

Catalog excerpts

All Surface controls catalogs and technical brochures