FBO PM - FBO puremaxLED® ILLUMINATION OF AREAS DIFFICULT TO ACCESS WITH REGARDS TO LIGHT Orange peel Paint runs Paint defects Color defects The surface control optic FBO PM is used for surfaces with medium to high reflection. Thanks to its position in the floor, surface defects are visible in lower areas. Particularly in the automotive sector, it is suitable for: topcoat, assembly and audit sites as well as other areas... LABS FREE ▪▪ Electronic, digitally dimmable ▪▪ 3 x centrally arranged patented prism panes with plano-convex lens and black fields ▪▪ 3 x symmetrical reflectors, reflector chambers separated with regads to a light ▪▪ Steel sheet ▪▪ RAL9005 powder coated ▪▪ Walkable shatterproof glass ▪▪ Maintenance sheet on the bottom side ▪▪ Harting plug system or direct clamping in junction box ▪▪ 3 m connection cable Rated voltage Degree of protection IP54 Protection class Light distribution curve of FBO PM Options ▪▪ Additional lamp color temperatures ▪▪ Additional housing colors according to RAL Quality criteria ▪▪ ▪▪ ▪▪ ▪▪ Photobiological safety (EN 62471): Risk group 1 LABS-free CE label EAC certification design version) Permitted ambient temperature Technical specifications (FBO puremaxLED®). This chart shows the light distribution curve of a FBO PM with 3 x 25 watt Exterior and mounting dimensions of the FBO PM. All data in mm Order number Type code Connection system Harting connector system high polish Harting connector system