SPEC-NP SUPRATEC SYNEO The compact pen-type high-precision dispensing system quantitatively discharges very smallamounts via the motor drive and electronic methods without air- -pres: sure SUPRATEC SYNEO NANO PEN BASIC SYSTEM The Nano Pen System has a dedicated controller (NPC-10) and a nano-pen as a default to discharge a very small amount stably and with high-precision. The NPC-10 is a dedicated controller for the nano-pen basic system and has digital multi-functions, so you can easily control the discharge volume with just a simple operation. A pen-type dispenser that does not need to use air and can precisely dispense very small amounts with a motor-driven method. It is a new concept of dispenser that can conveniently and stably dispense ultra-fine amounts. NANO PEN WITH VALVE SYSTEN -Dosing volume-NANO PEN 3 : 1.9ufi/step NANO PEN 10 : 13.4ufi/step It's possible to discharge a very small amount of liquid containing a filler (with low to high viscosity) at the size of 00.5 or less by applying an anti-drip valve (refer to ADV5/ADV7, p23) to the NANO-PEN. It removes residual pressure that may occur when micro-spot dispensing is applied, and it prevents dehydration cakes, preventing the clogging of the nozzle tip due to filler. The NPC-10V is a dedicated control device for the nano-pen with a valve system that can control various dispensing conditions stably and easily with just a simple operation by providing multiple functions digitally. With the color touch screen, the operator can control the data easily and clearly. The magnet applied inside the nano-pen makes it easy to change barrels and set up. With its simple and compact design and structure, it is easy to configure an automated line or a multi-layer system, and it can be applied to various applications due to the high-speed discharge. * Barrels with a 3, 5, 10 and 30cc capacity can be applied. A barrel and a plunger dedicated for each barrel must be used.