
Curing of photoinitiated adhesives_ Curing with UV light or visible light in the specific wavelength per the chart below. All standard DELOLUX HID lamps are also range. DELOLUX LED curing lamps are especially suitable as suitable. Lamp type SUPRATECSVNEO DELO ++ especially suitable + suitable - not suitable Ce document vous est fourni par SUPRATEC SYNEO, partenaire exclusif de DELO en France www.supratec-syneo.com Product selection ■ Industrial Adhesives Headquarters ► Germany • Windach / Munich .. China • Shanghai Japan • Yokohama ► Malaysia • Kuala Lumpur Singapore South Korea • Seoul Taiwan • Taipei Thailand • Bangkok USA • Sudbury, MA Our selection charts / material selection guides are a technical selection aid giving an overview of various product variants. We will be pleased to provide you with sales details, such as available container sizes, stock availability and minimum order quantities, on request. The data and information provided are based on tests performed under laboratory conditions. Reliable information about the behavior of the product under practical conditions and its suitability for a specific purpose cannot be concluded from this. It is the customer's responsibility to test the suitability of a product for the intended purpose by considering all specific requirements and by applying standards the customer deems suitable (e.g. DIN 2304-1). Type, physical and chemical properties of the materials to be processed with the product, as well as all actual influences occurring during transport, storage, processing and use, may cause deviations in the behavior of the product compared to its behavior under laboratory conditions. All data provided are typical average values or uniquely determined parameters measured under laboratory conditions. The data and information provided are therefore no guarantee for specific product properties or the suitability of the product for a specific purpose. Nothing contained herein shall be construed to indicate the non-existence of any relevant patents or to constitute a permission, encouragement or recommendation to practice any development covered by any patents, without permission of the owner of this patent. All products provided by DELO are subject to DELO’s General Terms of Business. Verbal ancillary agreements are deemed not to exist. © DELO - This brochure including any and all parts is protected by copyright. Any use not expressly permitted by the Urheberrechtsgesetz (German Copyright Act) shall require DELO’s written consent. This shall apply without limitation to reproductions, duplications, disseminations, adaptations, translations and microfilms as well as to the recording, processing, duplication and / or dissemination by electronic means. 10/19 SELECTION CHART DELO PHOTOBOND one-component ■ UV-curing ■ UV- and light-curing ■ light-activated humidity curing
Open the catalog to page 1DELO PHOTOBOND photoinitiated-curing acrylates UV-curing Product code colorless clear colorless clear colorless clear colorless translucent colorless clear colorless clear blue fluorescent colorless fluorescent colorless fluorescent colorless clear colorless clear colorless clear colorless translucent yellowish clear colorless clear blue fluorescent yellowish fluorescent yellowish fluorescent Recommended preactivation time [s] Layer thickness 0.5 mm LED 400 nm, LED intensity 200 mW / cm2 DELO Standard 19 Recommended irradiation time [s] DELOLUX 80 / 400, intensity 200 mW / cm2 The products are...
Open the catalog to page 22 Pages
6 Pages
1 Page
3 Pages
2 Pages
2 Pages