*mydirectindustry

Catalogs
Supmea Automation
Ultrasonic flow meter

Ultrasonic flow meter

Product catalog summary

Introduction
The 1158-J-SUP ultrasonic flow meter is designed for process automation solutions, featuring advanced circuit design and stable performance. It is wall-mounted with a clamp-on sensor, suitable for water purification testing and residential water supply monitoring. It utilizes ARM and FPGA chips for high precision and reliable performance.

Features

Non-invasive installation without cutting pipes
Real-time measurement capabilities
Compatible with various piping materials including carbon steel, stainless steel, and PVC
Wide measuring range from DN25 to DN1200
Wide voltage power supply (10-36V) and RS485 communication for remote operation
Ingress protection rated at IP68
Standard 9m anti-interference shielding line

Performance Specifications

Flow range: 0.03 to 16 ft/s (0.01 to 5.0 m/s)
Accuracy: ±1.0%
Pipe size: 1” to 48” (25mm to 1200mm)
Fluid: Water

Function Specifications

Outputs: OCT Pulse output (0-5000Hz), Analog output (4-20mA, max load 750Ω)
Communication interface: RS485 MODBUS
Power supply: 10-36VDC/1A
Keypad: 16 (4×4) key with tactile action
Display: 20×2 lattice alphanumeric, backlit LCD
Temperature range: Transmitter (-10℃ to 50℃), Transducer (0℃ to 80℃)
Humidity: Up to 99% RH, non-condensing

Physical Specifications

Transmitter: PC/ABS, IP65
Transducer: Encapsulated design, IP68
Transducer cable: Standard length 30 ft (9m)
Weight: Transmitter approximately 0.7kg, Transducer approximately 0.4kg

Application and Installation
The flow meter is installed using enclosed screws and plastic bushings. A position drawing is provided for accurate installation. Wiring instructions are included for the transmitter and lengthened cable options.

Catalog excerpts

E-mail: [email protected] Ultrasonic flow meter Committed to process automation solutions Add : 5th floor, Building 4, Singapore Hangzhou Science Technology Park, Hangzhou Economic Development Area, 310018, Hangzhou, China

Open the catalog to page 1

E-mail: [email protected] Introduction 1158-J-SUP ultrasonic flow meter uses advance circuit design,coupled with excellent hardware designed in English and can be switched surfaces.It is easy to operate and with stable performance. This wall mounted ultrasonic flow meter with clamp on sensor is used in testing equipment filter elements for water purifier. It could be also installed in some residential areas and commonly used for testing water supply and monitoring.With functions like ARM,FPGA chip,low voltage and wide pulse transmission technology design can this ultrasonic flow meter reach a high...

Open the catalog to page 2

E-mail: [email protected] OCT Pulse output: 0-5000Hz. Analog output : 4 ~ 20mA, max load 750Ω. Communication interface Power supply 16 ( 4×4 ) key with tactile action. 20×2 lattice alphanumeric, back lit LCD. Common 0~80℃(80~150℃ high temperature optional) Physical specifications Transmitter Transducer cable Standard cable length: 30 ft (9m). Transmitter: approximately 0.7kg Transducer: approximately 0.4kg Product overview Add : 5th floor, Building 4, Singapore Hangzhou Science Technology Park, Hangzhou Economic Development Area, 31001

Open the catalog to page 3

E-mail: [email protected] Installation Transmitter Take out the enclosed screws and plastic bushings. Insert the plastic bushings into the installing holes. Put the flowmeter to the position and screw it in. Add : 5th floor, Building 4, Singapore Hangzhou Science Technology Park, Hangzhou Economic Development Area, 310018, Hangzhou, China

Open the catalog to page 4

E-mail: [email protected] www.supmea.com Position drawing A "Position Drawing" is in the packing. Please use it as a template in the place that you are going to install the Flowmeter. Then drill 4 installing holes at the screws position shown on the drawing with the 5.0mm drill. Wiring Transmitter wiring Add : 5th floor, Building 4, Singapore Hangzhou Science Technology Park, Hangzhou Economic Development Area, 310018, Hangzhou, China

Open the catalog to page 5

E-mail: [email protected] Lengthened cable Add : 5th floor, Building 4, Singapore Hangzhou Science Technology Park, Hangzhou Economic Development Area, 310018, Hangzhou, China

Open the catalog to page 6

E-mail: [email protected]

Open the catalog to page 7

Ultrasonic flow meter

Ultrasonic flow meter

Catalog excerpts

All Supmea Automation catalogs and technical brochures