SUP-ZP Ultrasonic level transmitter
7Pages

E-mail: info@supmea.com Ultrasonic level sensor Committed to process automation solutions SUP-ZP Add : 5th floor, Building 4, Singapore Hangzhou Science Technology Park, Hangzhou Economic Development Area, 310018, Hangzhou, China

E-mail: info@supmea.com The ultrasonic level sensor is a low-cost, non-contact and easy-to-install measurement device. It is able to meet the every-day needs of commercial production, as well serving a more specialized role in the technologically advanced aerospace industry, thus placing it firmly in the category of high-level measurement technology. Unlike other level indicators with limited uses, the easy-to-install ultrasonic level indicator is a highly accurate device with enough specialized uses to ensure that the needs of the customer are met. Not effected by material property, such...

E-mail: info@supmea.com B = Blanking distance D =Distance from transducer to material surface L = Height in silo The distance D is determined from the velocity of sound and the time period t by the formula: D = V*T /2 Example: With the velocity of sound = 334.1 M/s, a time period of 60m/s corresponds to a transmission path of 20.046M and thus to a distance of 10.023M. An integrated temperature sensor detects the temperature in the vessel and compensates the influence of temperature on the signal running time. Add : 5th floor, Building 4, Singapore Hangzhou Science Technology Park, Hangzhou...

E-mail: info@supmea.com Sewage/waste water/tapwater treatment equipment. Such as silos, open tanks , dams and wells. Liquids such as edible-oils, sauces and beverages. Chemical material such as solvent, paints, carbonic acid, water lime slurry and wax. Granular materials such as flour, wheat and corn. Chemical fibers, petrochemical materials such as plastic powders, plastic granules and plastic chips. Add : 5th floor, Building 4, Singapore Hangzhou Science Technology Park, Hangzhou Economic Development Area, 310018, Hangzhou

E-mail: info@supmea.com Measure Range： Blind zone： Display resolution: Power consumption： Output (optional)： Electrical Connection: Ingress Protection： Add : 5th floor, Building 4, Singapore Hangzhou Science Technology Park,

E-mail: info@supmea.com Installation The transducer should not be mounted too close to the tank wall, the build-up on the tank wall cause false echoes. Keep transducer perpendicular to liquid. When you mount the transducer on the solid tank, the transducer must point to the tank outlet. Mount the transducer away from the inlet to avoid false echoes. The transducer should not be mounted too close to the tank wall, the bracket can cause strong false echoes. As is illustrated by the figure on the right, the transducer should be mounted on the top of guide tube to prevent the false echoes from...

E-mail: info@supmea.com