SUP-EC8.0 conductivity meter
7Pages

{{requestButtons}}

Catalog excerpts

SUP-EC8.0 conductivity meter - 1

E-mail: info@supmea.com Conductivity controller Committed to process automation solutions Add : 5th floor, Building 4, Singapore Hangzhou Science Technology Park, Hangzhou Economic Development Area, 310018, Hangzhou, China

Open the catalog to page 1
SUP-EC8.0 conductivity meter - 2

E-mail: info@supmea.com The SUP-EC8.0 is used in industrial measuring of the temperature, conductivity, Resistivity, salinity and total dissolved solids, such as waste-water treatment, environmental monitoring, pure water, sea farming, food production process, etc. The instrument can be panel, wall or pipe mounted. The instrument provides two current outputs. The maximum load is 500Ω. The instrument provides 3 relays. It can pass though a maximum of 5A/250VAC or 5A/30VDC. Characteristics ■ Easy operation ■ EC or TDS sensors can be connected thanks to ■ NEMA enclosure for field mounting and...

Open the catalog to page 2
SUP-EC8.0 conductivity meter - 3

E-mail: info@supmea.com Isolated, 4 to 20mA output , max. load 500Ω Temp. current output 2 Isolated, 4 to 20mA output , max. load 500Ω Current output accuracy Baud rate Maximum relay contacts capacity Cleaning setting clean/period alarm/error alarm Relay delay Data logging capacity Language selection English/traditional Chinese/simplified Chinese Waterproof grade Power supply From 90 to 260 VAC, power consumption < 7 Watts panel/wall/pipe installation Dimension 144 series: The instrument can be panel, wall or pipe mounted installation. Panel Installation: Make a 138x138 mm square cutout and...

Open the catalog to page 3
SUP-EC8.0 conductivity meter - 4

E-mail: info@supmea.com installation figure Connection label Add : 5th floor, Building 4, Singapore Hangzhou Science Technology Park, Hangzhou Economic Development Area, 310018, Hangzhou, China

Open the catalog to page 4
SUP-EC8.0 conductivity meter - 5

E-mail: info@supmea.com Electrode connection figure 1. Date and time 2. Main display 3. Unit 4. Temperature and unit 5. First current output 6. Second current output 7. Measurement status and Error indicator, there is no display if meter is in keeping mode 8. Count down timer: cycle time/clean time, it also displays the “delay” when relay3 has a delay enabled. 9. Temp. compensation: auto(ATC) or manual(MTC) 10. Relay indicator Note: If the EC readings are over the range, it will display 99.99/999.9/9999 If the temperature readings are under or over the range, it will display -99.9/999.9....

Open the catalog to page 5
SUP-EC8.0 conductivity meter - 6

E-mail: info@supmea.com Ordering Code Conductivity meter SUP-EC8.0 Range Cell constant Relay Power supply Cable Length From 90 to 260 VAC, power consumption < 7 Watts Add : 5th floor, Building 4, Singapore Hangzhou Science Technology Park, Hangzhou Economic Development Area, 310018, Hangzhou, Chin

Open the catalog to page 6
SUP-EC8.0 conductivity meter - 7

E-mail: info@supmea.com

Open the catalog to page 7

All Supmea Automation catalogs and technical brochures