LPS-75 sries 95 75W Single Output Switching Power Supply Features : Universal AC input / Full range Protections: Short circuit / Overload / Overvoltage Cooling by free air convection PWM control and regulated Small and compact size Built-in remote ON-OFF control LED indicator for power on 100% full load burn-in test ICBCC us UE SPECIFICATION MODEL LPS-75-3.3 LPS-75-5 LPS-75-12 LPS-75-15 LPS-75-24 LPS-75-48 DC VOLTAGE 3.3V 5V 12V 15V 24V 48V RATEDCURRENT 15A 15A 6.2A 5A 3.2A 1.56A CURRENTRANGE 0 ~ 16.5A 0 ~ 16.5A 0 ~ 6.8A 0 ~ 5.5A 0 ~ 3.5A 0 ~ 1.7A RATED POWER 49.5W 75W 74.4W 75W 76.8W 75W PEAK LOAD(10sec.) Note.4 54.45W 82.5W 81.6W 82.5W 84W 81.6W RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 100mVp-p 100mVp-p 120mVp-p 120mVp-p VOLTAGE ADJ. RANGE 3 ~3.5V 4.75 ~ 5.5V 11 ~ 13.5V 13.5 ~ 16.5V 22 ~ 27V 45 ~ 54V VOLTAGE TOLERANCE Note.3 ±3.0% ±3.0% ±2.0% ±2.0% ±2.0% ±2.0% LINE REGULATION ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% LOAD REGULATION ±3.0% ±3.0% ±2.0% ±2.0% ±1.0% ±1.0% SETUP, RISE TIME 100ms, 35ms/230VAC 100ms, 35ms/115VAC at full load HOLD UP TIME (Typ.) 60ms/230VAC 12ms/115VAC at full load VOLTAGE RANGE 90 ~ 264VAC 127 ~ 370VDC FREQUENCYRANGE 47 ~63Hz EFFICIENCY(Typ.) 69% 77% 80% 81% 83% 83% OUTPUT INPUT AC CURRENT (Typ.) 1.9A/115VAC 1.1A/230VAC INRUSH CURRENT (Typ.) COLD START 18A/115VAC 36A/230VAC protection LEAKAGE CURRENT OVERLOAD <1mA/ 240VAC 115 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.8 ~ 4.45V 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V 57.6 ~ 67.2V OVER VOLTAGE Protection type : Hiccup mode, recovers automatically after fault condition is removed function REMOTE ON/OFF RC+/RC- : 0 ~ 0.8V power on ; 4 ~ 10V power off WORKING TEMP. -20 ~ +70°C (Refer to output load derating curve) WORKING HUMIDITY 20 ~ 90% RH non-condensing environment STORAGE TEMP., HUMIDITY -20 ~ +85°C, 10 ~ 95% RH TEMP. COEFFICIENT ±0.04%rc (0 ~ 50°C) VIBRATION SAFETYSTANDARDS 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1,TUV EN60950-1 approved SAFETY& EMC (Note 5) WITHSTAND VOLTAGE ISOLATION RESISTANCE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC emi conduction & radiation Compliance to EN55011, EN55022 (CISPR22) Class B HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11 ; ENV50204, EN55024, EN61000-6-2 (EN50082-2), heavy industry level, criteria A OTHERS MTBF 355Khrs min. MIL-HDBK-217F (25°黇) DIMENSION PACKING 222*55*30mm (L*W*H)_ 0.3Kg; 48pcs/15.6Kg/1.12CUFT NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. 33.3% Duty cycle maximum within every 30 seconds. Average output power should not exceed the rated power. 5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:LPS-75-SPEC 2008-03-25 Sunpower (UK) Ltd Orion House, Calleva Park, Aldermaston, Berkshire, RG7 8SN Tel: +44 (0)118 981 1001 Fax: +44 (0)118 981 2002 E-mail: [email protected]

75W Single Output Switching Power Supply LPS-75 sries Mechanical Spcification Unit:mm 222 212 0 in CN1 5 3 1 CN3 1 2 CN2 3 4 5 SVR1 6 ^ o ~-LED en Ml e AC Input Connector (CN1) : JST B5P-VH or equivalent DC Output Connector (CN2) : JST B6P-VH or equivalent Pin No. Assignment Mating Housing Terminal Pin No. Assignment Mating Housing Terminal 1 AC/L 1,2,3 -V JSTVHR JSTSVH-21T-P1.1 2,4 No Pin JSTVHR JSTSVH-21T-P1.1 4,5,6 +V or equivalent or equivalent 3 AC/N or equivalent or equivalent 5 FG i Remote ON/OFF Connector(CN3):JST B2B-XH or equivalent Pin No. Assignment Mating Housing Terminal 1 RC+ JSTXHP...