1. Catalogs
  2. Sunpower UK
  3. 100W IP66 Constant Voltage LED Lighting Power Supplies

100W IP66 Constant Voltage LED Lighting Power Supplies

100W IP66 Constant Voltage LED Lighting Power Supplies

100W IP66 Constant Voltage LED Lighting Power Supplies

Product catalog summary
Overview: The CEN-100 Series is a range of 100W IP66 constant voltage LED lighting power supplies designed for both indoor and outdoor applications. These power supplies feature universal AC input, adjustable output voltage, and constant current levels, along with built-in active PFC function and multiple protection mechanisms.
Features: The power supplies offer universal AC input up to 295VAC, IP66 protection level, and are suitable for dry, damp, and wet locations. They include protections against short circuit, over current, over voltage, and over temperature, and are cooled by free air convection. The units comply with worldwide safety regulations for lighting and are highly reliable.
Specifications: The power supplies have a case size of 193 x 62.5 x 40.5 mm. Input voltage ranges from 90V to 295VAC or 127V to 417VDC, with a frequency of 47 to 63 Hz. The power factor is greater than 0.97 at 115VAC, 0.95 at 230VAC, and 0.92 at 277VAC at full load. Output voltage options range from 20V to 54V, with adjustable ranges and constant current operation. Efficiency ranges from 88% to 91% depending on the model.
Protection Mechanisms: The power supplies feature over voltage, short circuit, over temperature, and over current protections. They operate in hiccup mode for short circuit protection and automatically recover after fault conditions are removed.
Environmental Conditions: Operating temperature ranges from -30 to +70℃, with de-rating required from 50 to 70℃ at 60% load. The units can operate in humidity levels from 20% to 95% RH and withstand vibrations of 10 to 500Hz.
Safety and Compliance: The power supplies meet safety standards such as UL8750, TUV EN61347-1, and others. They comply with EMC standards including EN55015 and EN61000 series for EMI and EMS.
Performance Characteristics: The power supplies exhibit a power factor greater than 0.92 at full load and efficiency up to 91%. They are designed to operate in constant voltage or constant current modes, suitable for LED applications.
Additional Information: The power supplies are considered components to be used with final equipment, and EMC performance must be re-qualified by the final equipment manufacturers. Direct connection to LEDs is recommended, but additional drivers are not suitable.
See more

Catalog excerpts

100W IP66 Constant Voltage LED Lighting Power Supplies-1

CEN-100 Sries 100W IP66 Constant Voltage LED Lighting Power Supplies TECHNOLOGY LLP Features Universal AC input up to 295VAC 镕 Adjustable output voltage & constant current levels IP66 level for indoor and outdoor applications Օ Built in active PFC function Short circuit, over current, over voltage, over temperature protections Օ Cooling by free air convection High reliability Օ Compliance to worldwide safety regulations for lighting Suitable for dry, damp, wet locations i© W®IP66SELV CՀ^LE a<§> C5UUSCB Case: 8011BV 193 x 62.5 x 40.5 mm Spcification Voltage 90V~295VAC or127V~417VDC. Frequency 47 ----- 63 Hz INPUT Current 1.4A@115VAC 0.7A@230VAC Inrush Current 60A@230VAC Leakage Current <0.75mA@240VAC input Power Factor PF>0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to Power Factor Characteristics curve) OUTPUT MODEL No. CEN-100-20 CEN-100-24 CEN-100-30 CEN-100-36 CEN-100-42 CEN-100-48 CEN-100-54 Voltage 20V 24V 30V 36V 42V 48V 54V Voltage Adj. Range 17~22V 22~27V 27~33V 33~40V 37~46V 43~53V 49~58V Constant Current Operation 13~20V 15.6~24V 19.5~30V 23.4~36V 27.3~42V 31.2~48V 35.1~54V Rated Current 4.8A 4A 3.2A 2.65A 2.28A 2A 1.77A Current Adj, Range 3.12~4.8A 2.6~4A 2.08~3.2A 1.72~2.65A 1.48~2.28A 1.3~2A 1.15~1.77A Power 96W 96W 96W 95.4W 95.76W 96W 95.58W Ripple & Noise 2V 2.7V 3V 3.6V 4V 4.6V 5V Efficiency (TYP.) 88% 89% 90% 90% 90% 91% 91% Over Voltage 22.8~26V 28~32V 34~38V 41~46V 47~52V 54~60V 59~65V Shutdown output voltage, re-power on to recover PROTECTION Short Circuit Hiccup mode, recovers automatically after fault condition is removed Over Temperature 100°C ±10°C (RTH1); shutdown output voltage, re-power on to recover Over Current 95~110%; constant current limiting, recovers automatically after fault condition is removed Voltage Tolerance ±10% ELEC. CHAR. Line Regulation ±3.0% Load Regulation ±5.0% Setup Time 3000ms@230VAC 5000ms@115VAC, full load Temperature Operating: -30~+70°C ; De-rating: 50~70°C@60% load ; Storage: -40~ +80 °C ENVIRONMENT Humidity Operating: 20%~95% RH; Storage: 10%~95% RH (non condensing) Temp. Coefficient ±0.03%/C (0~50C ) Vibration 10~500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes Withstand Voltage I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC SAFETY Isolation Resistance I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25°C/ 70% RH Safety Standard UL8750, TUV EN61347-1, EN61347-2-13, J61347-1, J61347-2-13 EMC EMI Compliance to EN55015, EN61000-3-2 Class C (>65% load) ; EN61000-3-3 EMS Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61547, light industry level (surge 4KV), criteria A OTHERS M.T.B.F. 519.5K hrs min. MIL-HDBK-217F (25°C) Packing N.W.:0.6Kg / 1pc; 24pcs / 15.4Kgs; 1.11CUFT / 1 CTN 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the static characteristics for more details. 5. Constant current operation region is within 65% ~ 100% rated output voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for specific system design. 6. The power supply is considered a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation. 7. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers. Sunpower Technology LLP Orion House, Calleva Park, Aldermaston, Berkshire RG7 8SN Tel: +44 (0)118 981 1001 E-mail: [email protected]

 Open the catalog to page 1
100W IP66 Constant Voltage LED Lighting Power Supplies-2

CEN-100 Sries 100W IP66 Constant Voltage LED Lighting Power Supplies TECHNOLOGY LLP Block Diagram Fosc : 42KHz (115VAC) 68KHz (230VAC) i/p 1 EMI FILTER & RECTIFIERS POWER SWITCHING RECTIFIERS & FILTER -o +V -o -V FG o- O.L.P. PWM & PFC CONTROL DETECTION CIRCUIT 3Js:^:sjz.L-|~~O.V.P. - O.C.P. Dimensions 193 Case: 8011BV Unit: mm 10.5 172 7.6 300 ±20 T case 86 ADJ. a3°I. 300 + 20 AC/L(Brown) _ AC/N(Blue) -s- SVT18AWG X 2C +V(Red) -V(Black) FG © (Green/Yellow) SJTW 18AWG X 3C 30.64 04.6X4PL ■H T case: Max. Case Temprature. Sunpower Technology LLP Orion House, Calleva Park, Aldermaston, Berkshire...

 Open the catalog to page 2
100W IP66 Constant Voltage LED Lighting Power Supplies-3

CEN-100 Sries JtfJ^"rasFsat 100W IP66 Constant Voltage LED Lighting Power Supplies ^飙 mmm m^mwmmmw mmm mmrm Power Factor Characteristics Efficiency vs Load (48V Model) li_ q_ 1.00 0.98 0.96 0.94 0.92 0.90 0.88 0.86 0.84 0.82 0.80 0.78 >- o lij o u_ u_ lu 277Vac 230Vac 115Vac 50% 60% 70% 80% 90% 100% (100W) 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD LOAD Driving Method For LED Module 100 Constant Current area A typical LED power supply would work in constant voltage mode (CV) or constant current mode (CC) to drive LEDs. These power supplies can be operated at CV mode (with LED driver at Constant...

 Open the catalog to page 3
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.