Wall mount SYS1381N-Wxx series GREEN MODE Operating Temperature : Approvals / Marks : Specifications Basic Models Ripple / Noise Features: Certified plugs Wxx = W2E - Europe | W3U - England | W2 - USA, Canada, Japan,Taiwan | W2A - Australia | W2C - China For all models, the minimum rising step of output voltage is 0.1V - 4.0V~24V 12W max | Private Label Marking Available | 2 Years Warranty Turn delay 5000ms max@AC low line input@output full load 10ms min@AC nominal input@output full load Efficiency (Normal) Transient response (dv,tmax) SAFETY CE | CB | TUV/GS | UKCA 16ms tmax Dynamic rise time 10 us max,duty 40ms max,Dynamic load step is slew rate of 0.5A/us Ambient temp: 35C+-3%; 80% load; input voltage 230V; 2 hours. Dielectric Strength (Hi-pot) Power consumption 0.1W max. At AC nominal input@output min load 500,000 Calculated Hours at 25ºC, by Telcordia SR-332 Cable Length 1370mm (4.5 feet) standard cable or as required PLD (power line disturbance) Line power surge | Line voltage SAG-more info on request Cooling method Natural Convection Cooling Housing material Temperature coefficient: INPUT Voltage 0.5A rms@AC low line input and DC output full load Inrush Surge Current (cold start) 40/60A max@power supply cold start,ambient temperature 25°C @115Vac/230Vac nominal AC input leakage current HI-POT B / IEC 320 2pin primary to secondary 4000Vdc 10mA 1min Operating: 8%~90%RH / Storage: 5%~95% RH non condensing Over current/ Short protection The power supply will self-protect any output to ground, And auto recovery when abnormal circuit faults remove. An output short Over Voltage The power supply will not be auto recovered when faults remove Input protection F1:1A /250V Fuse. The power supply shall be protected against The power supply is provided with no load operation to prevent Protection class

Wall mount Mechanical case specification: Mechanical specification (country housing): Europe / Korea type (W2E/W2K) Cable specification: Connectors 2.1*5.5*11; 1.7*5.5*11; micro USB Cable (2468#20*2C / 4.5FT)