Catalogs >
Sunny >
SYS1001-W2E series

SYS1001-W2E series
2Pages

Catalog excerpts

Wall mount SYS1001-W2E series GREEN MODE Operating Temperature : Approvals / Marks : Features: Output connector: standard: 2.1 x 5.5 x 11mm or customer requirement | Regulated Output With Low Ripple Noise | Safety Agency Requirements and EMI/EMS Certified Private Label Marking Available | Modified and Custom Design Available | 2 Years Warranty OUTPUT Turn delay 3000 ms max @ AC low line input＠output full load 8ms min@AC nominal input@output full load (>half cycle) Efficiency (Normal) >70.4%@115v/60HZ,230V/50HZ input &Full load Full load 2 Hours Power consumption Less than 0.1W rms max. At AC nominal input@output no load 500,000 Calculated Hours at 25ºC, by Telcordia SR-332 Cable Length Dielectric Strength(Hi-pot) 1370mm (4.5 feet) standard cable or as required PLD (power line disturbance) Line power surge | Line voltage SAG-more info on request 0.5A rms @ AC low line input and DC output full load Cooling method Natural Convection Cooling Inrush Surge Current (cold start) 30/40A max@power supply cold start,ambient temperature 25°C @100Vac/230Vac nominal AC input Housing material leakage current Temperature coefficient: Operating: 8%~90%RH / Storage: 5%~95% RH non condensing Over current/ Short protection The power supply will self-protect any output to ground and auto recovery when abnormal circuit faults remove. An output short circuit is defined as any output impedance of less than Over Voltage The power supply will be auto recovered when faults remove Input protection The switching adaptor use 0.68/4.7/10 Ω resistance fuse. The power supply is provided with no load operation to prevent the power supply and system from damage. Protection class

Open the catalog to page 1