GENERAL INFORMATION WARRANTY POLICY Sunnex warrants that products in this document “Instructions to use” shall be free from defects in material and workmanship and this warranty shall remain in force and effect for a period of three (3) years from and after the date of its delivery ( “Warranty Period”) provided that this warranty shall be subject the following conditions: (a) The Sunnex installation instructions shall have been strictly complied with in all respects by the party performing the installation of the product. * The product cannot be altered, equipped with other components or accessories...

ABOUT SUNNEX TASK LIGHTING PRODUCTS ››› CHOOSE THE RIGHT LIGHTING There are different task lighting series available from Sunnex. Each series is designed with its own unique properties as regards light ergonomics, heat production, adjustability and impact resistance. Together with each task lighting series, you will find a Lux diagram that shows the intensity and distribution of light produced by each particular lamp. The measurement is taken at a distace of 0,5 meters. Using the Lux diagram, you can select which product will produce the particular light qualities you desire. * There are also...

Beam angle: Nominal effect: PLUTO LED Light 12V/2W, 8 Lens PLUTO LED Light 12V/2W, 25 Lens PLUTO LED Light 12V/2W, 40 Lens ››› NOTE Use only Sunnex original parts to secure the function and performance of Sunnex lighting series. Contact your local dealer if you are unsure how to handle replacements on Sunnex Pluto. ››› MOUNTING INSTRUCTIONS Mount the lamp on a horizontal surface with the four attached screws. Hole pattern, see dimensional drawing on page 9. Available for the Gooseneck arm is Sunnex mounting accessories; Magnetic base, C-clamp, Wall bracket and Desktop base. Plug in the AC/DCAdapter...

››› TECHNICAL DATA Beam angle: ››› NOTE Use only Sunnex original parts to secure the function and performance of Sunnex lighting series. Contact your local dealer if you are unsure how to handle replacements on Sunnex Tellus. B Sunnex TELLUS – Spot arm ››› 12-24V AC/DC - sub base ››› Service life, LED light source >25 000 hours ››› With single swivel Joint on lamp head ››› IP 20 ››› Colour; Black ››› MOUNTING INSTRUCTIONS Mount the lamp on a horizontal surface with the four attached screws. Hole pattern, see dimensional drawing on page 11. Available for the Gooseneck arm and Spot arm are also...

SUNNEX LUMIUS – 4W LED A Sunnex LUMIUS – Gooseneck arm ››› Arm length; 500 or 700 mm ››› 230V – separate AC/DC adaptor ››› 12-24V DC – sub base ››› Service life, LED unit >75 000 hours ››› With or without swivel joint lamp head AC/DC-Adapter 230/12VDC-12VA Power LED light source – 3,6W (3x1,2W) Nominal effect: Main voltage: ››› NOTE Use only Sunnex original parts to secure the function and performance of Sunnex lighting series. The cordset in this product is a non-replaceable type. If the cordset is damaged, the transformer unit has to be replaced, and it should be done by the maufacturer or...

››› TECHNICAL DATA A Sunnex SOLUS 6 – Gooseneck arm ››› Arm length; 500 or 700 mm ››› 12-24V AC/DC - sub base ››› Service life, LED light source >30 000 hours ››› With or without swivel joint lamp head ››› Without joint IP65 ››› Colour; Black Nominal effect: Beam angle: Main voltage: ››› NOTE Use only Sunnex original parts to secure the function and performance of Sunnex lighting series. Contact your local dealer if you are unsure how to handle replacements on Sunnex Solus 6. ››› MOUNTING INSTRUCTIONS Mount the lamp on a horizontal surface with the four attached screws. Hole pattern, see dimensional...

››› TECHNICAL DATA Main voltage: Nominal effect: Dimmer: Standard Beam angle: Available: B Sunnex SOLUS 9 – Spot arm ››› Service life, LED light source >50 000 hours ››› With Swivel Joint on lamp head ››› IP 20 ››› Colour; Black C Sunnex SOLUS 9 – Articulated arm ››› 2-section 1000mm or 3-section 1250mm arm ››› With Swivel Joint on lamp head ››› IP 20 ››› Colour; Black ››› NOTE Use only Sunnex original parts to secure the function and performance of Sunnex lighting series. Contact your local dealer if you are unsure how to handle replacements on Sunnex Solus 9. ››› MOUNTING INSTRUCTIONS Mount...

››› TECHNICAL DATA A Sunnex Luxor – Gooseneck arm ››› Arm length; 500 mm ››› 24-36VDC – sub base ››› With or without swivel joint lamp head Main voltage: Nominal effect: ››› MOUNTING INSTRUCTIONS Mount the lamp on a horizontal surface with the four attached screws. Hole pattern, see dimensional drawing on page 21. Available for the Gooseneck arm and Spot arm are also Sunnex mounting accessories; Magnetic base, C-clamp, Wall bracket and Desktop base. Plug in the cordset to 230V main socket. On/off function is handled with switch in lampbase or lamp head (articulated arm). ››› IP-Class; IP20 or...

››› TECHNICAL DATA 12/24V AC/DC 3W, 165Lm AC/DC-Adapter 230/12VDC-12VA Power LED light source – 3W/GU 5.3 ››› CHANGE THE LED LIGHT SOURCE Disconnect adapter from main socket. Unscrew the front part of lamphead, pull out the broken light source and replace with a new. Screw front part back in place. NOTE! The LED light source for Sunnex LS have an average service life of >25 000 hours. ››› NOTE Use only Sunnex original parts to secure the function and performance of Sunnex lighting series. The cordset in this product is a non-replaceable type. If the cordset is damaged, the transformer unit has...