X-SP-5063A: Genuine Honing Oils and Coolants
7Pages

{{requestButtons}}

Catalog excerpts

X-SP-5063A: Genuine Honing Oils and Coolants - 1

GENUINE SUNNEN HONING OILS AND COOLANTS Where Precision Starts

Open the catalog to page 1
X-SP-5063A: Genuine Honing Oils and Coolants - 2

Sunnen... Dedicated to Product Quality Sunnen, the world leader in honing equipment, built its reputation as the industry leader by stressing product quality and superior service. And these qualities are extremely evident in its premier line of honing oils and Genuine Sunnen Abrasives. Your use of these two products in combination will produce the lowest overall honing cost per part. Unfortunately, in many instances, the importance of the honing oil is left out of the equation and that can be a costly mistake — because the success of the honing process depends on precision performance by...

Open the catalog to page 2
X-SP-5063A: Genuine Honing Oils and Coolants - 3

Honing Solutions for Industrial MB-30 Honing Oil MB-30 is Sunnen’s multi-purpose industrial honing oil. For over forty years, MB-30 has set the standards by which other honing oils are judged. High performance lubricity agents combined with sulfur extreme pressure additives prevent welding and tearing of the work piece and keep the abrasive clean. MB-30 delivers maximum cutting rates and abrasive life when honing difficult materials like stainless steel, and features a much higher level of surface active lubricity agent than other petroleum based machining oils. The MB-30 formula contains...

Open the catalog to page 3
X-SP-5063A: Genuine Honing Oils and Coolants - 4

Applications copper, may produce stone loading. MAN-852 is approved by Boeing Aircraft Company and is used to hone critical parts where classic cutting oil additives such as sulfur or chlorine have been shown to cause microcorrosion, resulting in part failure. MAN-852 has a mild odor and is very gentle to the operator’s skin. It is very popular with operators who are sensitive to additives used in regular cutting oils. loading. Typically, this oil is used to hone critical parts where classic cutting oil additives such as sulfur or chlorine have been shown to cause microcorrosion, resulting...

Open the catalog to page 4
X-SP-5063A: Genuine Honing Oils and Coolants - 5

Honing Solutions for Automoti SCC-100/101 Grinding Coolant SCC-100/101 is a general purpose nonhazardous grinding fluid formulated to be very mild to the operator’s skin. The excellent foam control makes SCC100/101 ideal for use in grinders, especially the Sunnen Valve Refacer and Tappet Refacer. The coolant is compatible with machine tools that are designed to use water-based coolant. The coolant is recommended for light duty machining and grinding of alloy steels, copper alloys and some aluminum. SCC-100/101 is nonhazardous per OSHA, DOT and EPA regulations. LP8X is a chlorine-free...

Open the catalog to page 5
X-SP-5063A: Genuine Honing Oils and Coolants - 6

ve Engine Rebuilding MAN-C Honing Oil Concentrate MAN-C is a honing oil concentrate, which when mixed at the proper ratios with customer supplied mineral oil, makes MAN-845 or CK-50 honing oil. The end user will save on shipping expenses by purchasing the mineral oil locally and mixing it with MAN-C at their facility. CK-50 Honing Oil CK-50 is specially formulated for honing cast iron automotive and truck engine blocks and should not be used to hone other materials. It is petroleum based, containing high performance lubricity agents in combination with both sulfur and chlorine extreme...

Open the catalog to page 6
X-SP-5063A: Genuine Honing Oils and Coolants - 7

Honing Oil Selection Information RECOMMENDED HONING OIL INDUSTRIAL MB-30/ LT9X* Honing KROSSGRINDING® SINGLE STROKE HONING® Grinding Broaching Gundrilling Milling Drilling Turning Use as Additive Use as base Alnico Aluminum Berylium Brass Bronze Carbide Carbon Cast Iron(soft) Cast Iron (hard) Ceramic Cobalt Ferrite Glass Inconel Molybdenum Nickasil plating Nylon Plexiglass Polycarbonate Silver Steel (soft) Steel (hard) Steel (stainless) Stellite Quartz Titanium Zirconium (1) Requires metalbond abrasive (2) Depends on Material * The concentration requirements for MAN-C and LT9X will vary by...

Open the catalog to page 7

All Sunnen Products Company catalogs and technical brochures

  1. SV-30 series

    8 Pages

  2. SV-15

    8 Pages

  3. DH SERIES

    8 Pages

  4. SHDD Series

    8 Pages

  5. Portable Hones

    34 Pages

  6. GHSS GHTS

    16 Pages

  7. Gears

    5 Pages

  8. Hydraulics

    5 Pages

  9. SH-6000

    8 Pages

  10. SH-5000

    8 Pages

  11. SH-4000

    8 Pages

  12. SSH-1680

    2 Pages

  13. MBB-166

    2 Pages

  14. 2C Tooling

    2 Pages

  15. CH-100

    6 Pages

  16. Portahones

    6 Pages

  17. M-series

    12 Pages

  18. MPS

    9 Pages

  19. GNH

    1 Pages

  20. X-SP-5061

    29 Pages