Catalog excerpts
The Sunnen "PG" Bore Gaging System is a unique mechanical gaging system that makes I.D. Gaging simple, reliable, and economical. Eliminates buying and maintaining costly master rings and air gage probes. Both gage and setting fixture are built for everyday use making them ideal for "in-process" inspection. Available in ,001 mm or ,0025 mm (.00005" or .0001") reading scales. PG-710E Small Bore Precision Gage with PG-400E Setting Fixture PG-700E Small Bore Precision Gage Diameter Range: 2,29 mm-9,63 mm (.090"-.379")* Direct reading scale with , 13 mm (.005") range divided into increments of ,001 mm (.00005"). Order PG-700EM for metric applications. Weight: 9,3 kg (20.5 lbs.) Dimensions (without fingers): 267 mm x 197 mm x 165mm (10.5" H x 7.75" Wx 6.5" D) *Covered with complete set of gaging fingers. Individual finger sets can be ordered for specific sizes. Order individual finger sets from the complete list at right. PG-710E Small Bore Precision Gage Identical to PG-700 except direct reading scale is ,24 mm (.010") wide and divided into increments of ,0025 mm (.0001"). Order PG-710EM for metric applications. Gaging Fingers for PG-700 or PG-710 Precision Gage To order individual finger pairs, consult the table below for size ranges and part numbers. Each pair of gaging fingers is stamped with its size range and comes nested in an impact-resistant box. Available for sale only. Individual Gaging Finger Shipping Weight: ,2 kg (.5 lb.) *If bore can be measured from both ends, bore length can be double the gaging depth shown. Blind Hole Gaging Fingers for PG-700/PG-710 Gages Special Blind Hole Gaging Fingers are available on special order basis. These fingers are non-adjustable and can only be used for a specific diameter size. These altered blind hole fingers can measure to within 1,02 mm (.040") of the bottom of the blind end of the bore. Recommend customer use a ring gage to set size on the gage. How to order blind hole gaging fingers: PG--- HMOX The firstis the four-digit number of the standard gaging fingers for the diameter needed to be measured. The second____is the finished diameter of the bore to be measured, either in English or Metric units. Examples: 2,89 mm diameter. Order: PG-1109-2,890-HMOX .2092" diameter. Order: PG-1202-2092-HMOX Available 4 weeks after receipt of order.
Open the catalog to page 1PG-800E Precision Bore Gage Diameter Range: 9,4 mm — 38,1 mm (.370" — 1.500"} Direct reading scale with ,13 mm (.005") range divided into increments of ,001 mm (.00005"). Overall size range is divided into two subranges 9,4 mm-19,05 mm (.370"-.750") and 19,05 mm-38,1 mm (,750"-1.500"). Replaceable carbide gage points which can be rotated for long life. Size range can be increased to 74,3 mm (2.9") by ordering PG-250 Extension Finger Set. Order PG-800EM for metric applications. Dimensions: 267 x 197 x 213 mm (10-1/2" H x 7-3/4" W x 8-3/8" D) Gaging Depth: Small Side - 24,6 mm (.968") Large...
Open the catalog to page 2PG Bore Gaging System PG-500-U100X Setting Fixture for PG-810-Z08X (Similar to PG-500 Setting Gage.) Used to set 76,2 mm-109,47 mm (3.0"-4.310") diameter range on PG-810-Z08X. Also used with PG-800 Series Gage with PG-250 Extension Fingers and PG-2090-AM1X Auxiliary Face Plate to set diameters 73,4 mm-76,2 mm (2.890"-3.0"). Setting size on PG-810-Z08X from 109,47 mm-114,3 mm (4.310"-4.5") must be done utilizing ring gages or gage blocks. Order PG-500M-U100X for metric applications. Shipping Weight: 7,7 kg (17 lb.) PG-2110 Clip-On Auxiliary Faceplate For PG-700/710 Precision Gage. Additional...
Open the catalog to page 3Dial Bore Gages GR-3000 Dial Bore Gage Accessories Diameter Range: 1,37 mm All Sunnen Dial Bore Gages read out in ,002 mm (or .0001")* and feature all-carbide gaging points, wear-proof ball crank, and adjustable centralizers. Each gage comes packed in its own sturdy box with all tools and wrenches required for setup and adjustment. GRM/GR-3000 Dial Bore Gage Assembly consists of a ,002 mm reading indicator, probe retractor and probe retainer bushing in a reinforced nylon insulating shroud. Order GR-3000 for .0001" reading. Shipping Weight: 1 kg (2 lbs.) Probes and pins must be ordered...
Open the catalog to page 4Consists of 15 probes and 2 transfer pins. Covers a continuous diameter range from 4,2 mm-13,6 mm (.165"-.535"). Shipping Weight: ,2 kg (.5 lb.) Probe Extension* Available for probes 8,2 mm (.323") or larger. Probe extensions are 63,5 mm (2y2") long, and up to three can be assembled together. Part Number: KZ1X-3500. Blind Hole Probes and Transfer Pins Order standard probe and transfer pin number and add -KZ0X to number. Example: G-1240-KZ0X. NOTE: G-1055 probe and G-2037 transfer pin not available in blind hole configuration. Available 4 weeks after receipt of order. Carbide Inserted Gage...
Open the catalog to page 5Diameter Range: 12,6 Diameter Range: 18,8 .v i.. Non-retractable gage with ,002 mm metric or (.0001") reading | indicator. Capable of measuring to within 5,0 mm (.200") of the bottom of a blind hole. Indicators reading in ,010 mm or .0005" are available on special order. Retractable gage with ,002 mm metric or (.0001") reading indicator. Capable of measuring to within 6,8 mm (.270") of the bottom of a blind hole. Indicators reading in ,010 mm or .0005" are available on special order. Part Max. Overall Shipping Number Gaging Length Weight Depth Metric Inches mm in mm in kg lbs
Open the catalog to page 6GAM/GA-2000 Series Gages (Non-Retractable) GRM/GR-2000 Series Gages (Retractable) Retractable gage with ,002 mm metric or (.0001") reading indicator. Capable of measuring to within 8,5 mm (.335") of the bottom of a blind hole. Indicators reading in ,010 mm or ,0005" are available on special order. Part Max. Overall Shipping Number Gaging Length Weight Depth Metric Inches mm in mm in kg lbs *Furnished with metal case for accessories only. Replacement Parts For 2000 Series Gages: PBR-503A Indicating Ball (1/8" Diameter Carbide) G-522A Centralizer Points (Package of 2) G-640A Indicating Ball...
Open the catalog to page 7All Sunnen Products Company catalogs and technical brochures
-
SV-30 series
8 Pages
-
SV-15
8 Pages
-
Portable Hones and Accessories
20 Pages
-
DH SERIES
8 Pages
-
SV-2400 Series
8 Pages
-
Precision Honing Supplies
203 Pages
-
SHDD Series
8 Pages
-
CGT KROSSGRINDING®
14 Pages
-
Portable Hones
34 Pages
-
GHSS GHTS
16 Pages
-
corporate brochure
16 Pages
-
Small Engines
5 Pages
-
Cylinder Liners
5 Pages
-
Gears
5 Pages
-
Hydraulics
5 Pages
-
Fuel Injectors
5 Pages
-
HTD Heavy Duty Tube Hone
4 Pages
-
HTC Series Honing
4 Pages
-
SH-6000
8 Pages
-
SH-5000
8 Pages
-
SH-4000
8 Pages
-
SSH-1680
2 Pages
-
SV-15 Vertical Hone
8 Pages
-
SV-2500 series
8 Pages
-
Engine Honing Equipment
66 Pages
-
Precision Honing Supplies
199 Pages
-
HTB - S Series
8 Pages
-
MBB-166
2 Pages
-
2C Tooling
2 Pages
-
CH-100
6 Pages
-
SHO Honing Oil
2 Pages
-
Heavy-Duty Push Tools
60 Pages
-
Portahones
6 Pages
-
GHTS GHSS Engine
4 Pages
-
MMT High Production
2 Pages
-
GNH Giant Portable Hone
1 Pages
-
X-SP-9003: Dial Bore Gages
8 Pages
-
GH Tooling Catalog
60 Pages
-
X-SP-5070: 21 Case Histories
24 Pages
-
M-series
12 Pages
-
MPS
9 Pages
-
Multi-Stone (MMT) Tools
2 Pages
-
GNH
1 Pages
-
Sunnen Portable Hones
20 Pages
-
X-SP-5061
29 Pages