Catalogs >
Sunnen Products Company >
HTA Series HORIZONTAL TUBE HONING SYSTEMS

HTA Series HORIZONTAL TUBE HONING SYSTEMS
8Pages

Catalog excerpts

HTA Series HORIZONTAL TUBE HONING SYSTEMS - 1

ABOVE AND BEYOND HONING HTA Series HOR IZONTAL TU B E HON I NG SYSTEMS

HTA Series HORIZONTAL TUBE HONING SYSTEMS - 2

SUNNEN’S NEW HTA TUBE HONES PACK HIGH-END FE Before now, to get horizontal tube honing capabilities, you had to invest in large systems that tied up valuable ﬂoor space – not to mention valuable capital. But with our HTA tube hone, Sunnen® introduces the ﬁrst all-electric, lean design tube hone created speciﬁcally for hydraulic service facilities doing resurfacing and repair of actuators for construction, mining, farming, and forestry equipment. It is also ideally suited for other applications such as ﬂow tube/meter run cleanup, extruder tube repair and other low stock removal applications....

Open the catalog to page 2

HTA Series HORIZONTAL TUBE HONING SYSTEMS - 3

A TURES INTO AN AFFORDABLE, FLEXIBLE SYSTEM The HTA tube hone is ideal for resurfacing and repair work where light-duty stock removal up to 0.030 inches (0,76 mm) is needed to oversize deeply scored actuator bores. The spindle, powered by a 3 Hp (2,24 kW) AC gear motor, is controlled over a 20-300 rpm speed range. The servo stroking system has a speed range of 5 – 90 ft/min (1,52 – 27,4 m/min). This affordable and versatile system boasts many features found on high-end machines, such as a PLC-control with touch-screen interface for setting all machine parameters, including stroke reversal,...

Open the catalog to page 3

HTA Series HORIZONTAL TUBE HONING SYSTEMS - 4

High-end features give the HTA Tube Honing System great versatility and value  Electromechanical Stroker And Spindle, features a Siemens® servo stroker motor with belt drive for quiet and precise operation combined with a 3 Hp (2,24 kW) spindle unit. Improved stoker gear reducer increases torque by 35 %. Electric spindle motor cooling fan is standard.  Auto Tensioning System includes a programmable auto tool feed that’s standard equipment on the HTA. However, the abrasives can also be fed up manually, if desired. Paper Media Coolant Filtration Unit (not shown) has a 55 gallon (208 l)...

Open the catalog to page 4

HTA Series HORIZONTAL TUBE HONING SYSTEMS - 5

HTA Floor Plan Layout and Dimensions This versatile system packs a lot of performance into an efﬁcient footprint that’s signiﬁcantly smaller than other horizontal tube honing syste

Open the catalog to page 5

HTA Series HORIZONTAL TUBE HONING SYSTEMS - 6

Sunnen’s new HTA tube hone is suited for a wide range of applications, including reconditioning of hydraulic cylinders, die casting shot tubes, plastics extruder barrels and gas ﬂow meter tubes. Stroke: 1.5 Hp (1,12 kW) Stroke Speed Range: 5 – 90 ft/min (1,52 – 2,74 m/min) I.D. Diameter Range: 2.5 – 21 inches (64 – 533 mm)* *For diameter sizes below 2.5 inches (64mm), contact your Sunnen Field Engineer. The HTA is an all-electric machine. And no hydraulics mean less noise, no leaks, better control, and more accuracy during bore reversals. O.D. Diameter Range: 24 in. (610 mm) max Approximate...

Open the catalog to page 6

HTA Series HORIZONTAL TUBE HONING SYSTEMS - 7

Tooling The HTA is compatible with Sunnen portable tooling for precise, accurate and consistent bore sizing. It is speciﬁcally designed around the ANR-275 style tooling system with the ANR-160 hone head. Those shops already using ANR-style tooling can also use it with the HTA tube hone, including stone supports, master holders and abrasives. Bore Diameter Range: 2.5 – 21 inches (64 – 533 mm)* *For diameter sizes below 2.5 inches (64mm), contact your Sunnen Field Engineer. Sunnen-Made Abrasives From aluminum oxide to silicon carbide to diamond and CBN, Sunnen manufactures the industry’s...

Open the catalog to page 7

HTA Series HORIZONTAL TUBE HONING SYSTEMS - 8

WORLDWIDE Our global manufacturing, distribution, and sales and service network allows us to deliver quality Sunnen solutions worldwide. And our state-of-the-art Technical Services Centers allow our technical experts to develop innovative solutions to customer application challenges. The Centers also provide answers for customer questions and training for Sunnen representatives around the world. Sunnen Products Company World Headquarters St. Louis, MO – USA Phone 1.314.781.2100 Fax 1.314.781.2268 Toll Free 1.800.325.3670 Email sunnen@sunnen.com www.sunnen.com Austria - Sunnen Austria GmbH...

Open the catalog to page 8

HTA Series HORIZONTAL TUBE HONING SYSTEMS 8Pages

Catalog excerpts

All Sunnen Products Company catalogs and technical brochures

HTA Series HORIZONTAL TUBE HONING SYSTEMS
8Pages