Catalogs >
SUNMULON >
YH Lighted Pushbutton Switch

YH Lighted Pushbutton Switch
8Pages

Catalog excerpts

Although big button size, it is short body. ■FEATURES Depth behind panel : Only 22.5mm LED Full-Face, Split-Face, Dual-Color Prescision-snap action switch movement with coil spring assures long lifeand outstanding tactile feedback. Silver contact (Gold-plated) and W/E Alloy #1 Cross-bar contact provided. Accessories : Barriers, Guard-Cover Switch Connection SPECIFICATIONS Contact DC Rated (Silver contact) Operating Force(max.)

Open the catalog to page 1

YH STRUCTURE LIGHT CARTRIDGE CARTRIDGE BASE

Open the catalog to page 2

INTERNAL CONNECTION ARRANGEMENTS •Dual-Color Combination LC-L1 •TERMINAL DIMENSIONS (BOTTOMVIEW) INDICATOR Sunmulon Mark BOTTOM VIEW #110 Tab Soldering Terminal PCB Terminal

Open the catalog to page 3

ttunmulon LED DATA •LED RATINGS

Open the catalog to page 4

PANEL LAYOUT/PANEL CUT DIMENSIONS Panel Layout Panel thickness : 1mm~4.3mm Panel Cut Dimensions The mounting hole interval of each row with multiple blocks Without Barriers -more than 3 Panel cut dimension should be after panel paintings. BARRIERS In case of mounting switches, barriers can be used to prevent inadvertent pushing neibor switch, and inprove panel appearance. GUARD COVER used to prevent inadvertent and unitentional operations. ^The cover to be opend 180" and returned by spring force.

Open the catalog to page 5

Bunmulon ACCESSORIES •DIVIDER 1. Removing Light cartridge 2. Removing Button & Fitting Button Hang the cartridge with the removing tool in the groove, and put it out straight. Hook fingernails at A and gently release the clip, and release another side as well. Set Filter(s) as shown on to Light cartridge carefully, then put button on. Align the groove on the button, the projection on the Light cartridge, and fit the button until click. Removing Tool 4. Fitting Light cartridge 5. Installing Guard cover 6. Installing Barriers (Serial) Fit the Guard cover projection into the groove until...

Open the catalog to page 6

Sunmulon LIGHT CARTRIDGE • BUTTON SHAPE - ILLUMINATION TYPE NOTE) Filer not to be used with colored button. The Color of “Yellow" for LED, button, filter is actually “Orange Yellow" not Lemon Yellow. When using Lemon Yellow filter, specify LED color Green. •NOTES 1) In case of Split-Face, LED and filter color location should be specified as follow. Sunmulon Mark 2) In case of Split-Face, button color should be C(clear). 3) In case of Dual-Color, button color should be C(clear) with Milk-White filter or Milk-White button. 4) In case of simultaneous illumination for Split-Face and Dual-Color...

Open the catalog to page 8

YH Lighted Pushbutton Switch 8Pages

Catalog excerpts

All SUNMULON catalogs and technical brochures

YH Lighted Pushbutton Switch
8Pages