1. Catalogs
  2. SUNMULON
  3. ST Lighted Touch Switch

ST Lighted Touch Switch

ST Lighted Touch Switch

ST Lighted Touch Switch

Product catalog summary
Specifications
- Ambient Humidity: 10-80% RH
- Ambient Temperature: -10 to 50°C
- Supply Voltage: DC5-24V (±10%)
- Insulation Resistance: More than 100MΩ at 500V DC
- Dielectric Strength: 500V AC RMS between terminals and ground
- Operation Life: More than 1,000,000 operations
- Operating Force: 0.3-0.6N (Reference)
- Current Consumption (Unload): Less than 5mA (Apply DC12V)
- Current Output: Voltage DC35V, Current 200mA MAX
- Switching Circuit: Pulse Regulated Circuit
Operation Theory
- Easy operation with light and soft touch (No click)
- LED Full-Face and Dual-Color illumination available
- Momentary/Alternate action
Features
- Operable with gloves due to resistive film type
- Depth behind panel: Only 22.5mm
- Button Size: 17mm square type
- Legend on filter with engraving/printing available
- Wiring connection: With connector (Appended connector provided)
LED Ratings
- LED Colors: Red, Green, Orange Yellow, Milk White, Yellow
- Pulse Lighting: Pulse Width Pw = 100μS, Duty Ratio DR = 10-1, IFM = 120mA (any color)
- Recommended operating current IF (mA), Forward voltage VF (V), DC reverse voltage VR (V)
- Switches fitted with internal resistors for 5, 12, 24V DC supply
Notes
- Dual-Color simultaneous lighting not possible with built-in resistor type
- Filter should always be installed when operating
- Switch circuit could be affected by noise; use sealed wire or absorbing circuit
- Alternate action type resets if DC supply is cut while switch is locked
Installation and Removal
- Filter installation: Slide in until click
- Filter removal: Use tweezers to push out
- Panel Cut Dimensions: Panel thickness 1.0-3.2mm
See more

Catalog excerpts

ST Lighted Touch Switch-1

ST SPECIFICATIONS 1080% RH DC524V(10%) Ambient Humidity Ambient Temperature –10 to 50C Operation Life Operating Force Insulation Resistance More than 100M at 500V DC 50/60Hz for 60sec. At normal ambient temperature and humidity 500V AC RMS between terminals and ground Dielectric Strength Current Consumption (Unload) Current Output Supply Voltage Operation Pulse Regulated Switching Circuit Circuit Touching Part OPERATION THEORY Light & soft touch LED Full-Face and Dual-Color illumination available. Easy operation with light and soft touch. (No click) ST Lighted Touch Switch Momentary/Alternate action Voltage DC35V, Current 200mA MAX Less than 5mA (Apply DC12V) 0.30.6N(Reference) More than 1,000,000 operations FEATURES Easy operation with light and soft touch.(No click) As resistive film type, it is possible to operate with wearing gloves. Depth behind panel : Only 22.5mm LED Full-Face, Dual-Color, Illumination available. Button Size: 17mm square type Legend on filter with engraving/printing available. Wiring connection : With connecter (Appended connecter provided)

 Open the catalog to page 1
ST Lighted Touch Switch-2

ST 17 25.2 22 2 23 24.5 2 10 14 5 4.9 G L2 L1 LC OV L2 L2 L1 LC LC L1 L1 LC L1 LC Vcc GND OUTPUT ON OFF OUTPUT ON OFF LC-L1 LC-L2 5V 12, 24V LED+ LEDLEDLC V O G L1 L2 D 12 6 25 12 22 11 12 6 25 12 22 11 5 (5%) 12,24 (5%) 50 8 3.5 12 50 8 4.0 25 50 8 3.8 22 25 16 7.0 6 25 16 8.0 12 25 16 7.6 11 50 8 3.5 12 50 8 4.0 25 50 8 3.8 22 25 16 7.0 6 25 16 8.0 12 25 16 7.6 11 5V 12,24V 5V 12,24V R VF VF IF IF IF Vcc Vcc Vcc R R R R G G OY R G OY R Mono Color Dual Color G OY R G OY R G OY R G OY R G OY OY * Pulse Lighting Pulse Width Pw = 100S Duty Ratio DR = 10 –1 IFM = 120mA (any color) Fig. 1 Fig. 2...

 Open the catalog to page 2
ST Lighted Touch Switch-3

ST 23.425.2(n1) 23.40.2 25.2n 25.2 25.2 25.2 Red ST-3100-LR Green Orange Yellow Milk White Yellow Red Green Orange Yellow Milk White Yellow Red Green Orange Yellow ST-3100-LG ST-3100-LO ST-3100-LY ST-3100-LM 17.9 0.9 21.3 1.2 0.5 0 A G L2 L1 LC OV 1 250mm 500mm ST-3120-1 ST-3120-2 1 2 3 4 5 6 ST 2 1 2 K M A 2 1 2 3 4 5 7 6 8 9 1 2 3 4 8 S0 S3 K H A K Remove as shown with pushing out by tweezers or something like that. 2. Removing Filter * Cannot be installed after mounting switch on panel. Install as shown with sliding in until click. 1. Installing Filter Installing / Removing Filter 5) Regarding...

 Open the catalog to page 3
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.