*mydirectindustry

SL

Product catalog summary

Overview: The document provides technical specifications and handling instructions for the SL Micro Switch, a long-life, small-sized switch utilizing a coil spring for enhanced durability. It offers various options for operating force (O.F.), actuators, and terminals.

Specifications:

Contact Type: SPDT (Single Pole Double Throw)
Electrical Rating: AC 125V, 250V 5A (Resistive Load)
Insulation Resistance: More than 100MΩ at DC 500V Megger
Dielectric Strength: AC 1000V RMS between NC and NO terminal; AC 1500V RMS between terminals and ground
Mechanical Life: 10,000,000 operations minimum
Electrical Life: 50,000 operations minimum at rated load
Ambient Temperature: -15℃ to 85℃
Ambient Humidity: Maximum 85% RH
Contact Resistance: Less than 30mΩ at initial state

Dimensions and Types:

Various types including SL-□N Pin Plunger, SL-□NW1 Standard Hinged Lever, and SL-□NW3 Simulated Hinged Lever with specific operating characteristics such as operating force (OF), release force (RF), overtravel (OT), pretravel (PT), and movement differential (MD).

Handling Instructions:

Use a soldering iron of max 60W for a maximum of 5 seconds on any terminals, avoiding contact with the switch body.
Fix using M2.3 screw and flat/spring washer with a torque of 0.294N-m.
When mounting on a metal body, use insulation cloth between the switch and panel.

Ordering Code: Options for contact materials, actuators, and terminals are provided, with specific codes for each configuration.

Catalog excerpts

■ Using coil spring, it gets much longer life. Mechanical life : 10,000,000 operations(min.). ■Offered with a choice of various O.F., Actuators, Terminals. Contact (SPDT) *Shows specifications for Pin Plunger type. •SL-^NW1 Standard Hinged Lever

Open the catalog to page 1

Ounmulon DIMENSIONS •SL-^NW3 Simulated Hinged Lever _TERMINALS/DIMENSIONS_ •Solder Terminal : No mark •tfllO Tab Terminal : Mark P ORDERING CODE HANDLING HINTS 1. When soldering iron of max. 60W for a maximum of 5 seconds on any terminals be careful to ensure that the iron does not touch the switch body. 2. When fixing, use M2.3 screw and flat/spring washer and fix firmly. Moderage fixing torque is 0.294N-m j3kg-cml . 3. When mounting on metal body, it is recommended to use insulation cloth between switch and panel. We provide exclusive insulation cloth for SL switch.

Open the catalog to page 2

SL

SL

Catalog excerpts

All SUNMULON catalogs and technical brochures